Abstract:Polyvinyl chloride (PVC) waste plastic is a typical solid waste. In this paper, the dechlorination and carbonization behavior of PVC in ethanol-water/water system under different process parameters (temperature, residence time, solid-liquid ratio) was studied, and hydrothermal carbon was characterized by SEM, elemental analysis, TG-DTG, XPS, Py-GC/MS. The results show that temperature is the key to the hydrothermal dechlorination of PVC, and the dechlorination efficiency of PVC is the highest by parameter optimization (220°C-90 min-10% S/D-80% E/D), which can reach 96.33 %. With the removal of Cl, the surface of the PVC matrix changed from full and smooth flocculent to honeycomb with uniform pore size distribution. Thermogravimetric analysis shows that the combustion of hydrochar can be divided into three stages: HCl precipitation and volatile combustion, semi-coke and coke combustion, and fixed carbon combustion. The combustion parameters and kinetic parameters of hydrochar were measured, and it was found that the hydrothermal carbonization of PVC at higher temperatures and ethanol-water ratio could improve the combustion performance of hydrochar. The highest calorific value can reach 36.68 MJ/mol. Py-GC/MS analyzed the distribution of the pyrolysis products, and alkylbenzene and aliphatic were the main products of pyrolysis. The structural analysis of hydrochar showed that C-C and CC accounted for the largest proportion, accompanied by a small amount of C-O and CO and trace C-Cl. The possible reaction mechanism of the hydrothermal carbonization of PVC was analyzed based on the distribution of functional groups and compound composition. This work provides an effective and sustainable method for the recycling of refractory chlorinated plastics.

B202 In-furnace Reduction of HCI Emission by Alkali-based Sorbents During PVC Combustion in Fixed Bed

[Experimental and Mechanism Analyses on HCl Emission Control During PVC Combustion in Fixed Beds].

Experiments of PVC Gasification in a Fluidized Bed

Experimental Study of HCl Emission and Removal on Incinerating of Typical MSW Components in Fluidized Bed

Effect of Calcium-Based Sorbents on the Reduction of Chlorinated Contaminants During Municipal Solid Waste Thermal Treatment.

HCl EMISSION DURING CHLORIDE WASTES COMBUSTION PROCESS

Experimental Research on Emission and Capture of HCl in MSW Incineration

Research on the Control of HCl during the Incineration of Sawdust in a Fixed Bed

Co-hydrothermal dechlorination of PVC plastic and bagasse: Hydrochar combustion characteristics and gas emission behavior

HCl and PCDD/Fs emission characteristics from incineration of source-classified combustible solid waste in fluidized bed

Dichlorination in a Circulating Fluidized-Bed Incinerator for Municipal Solid Waste Incineration System

Experimental Study on HC1 Real-time Emission Characteristics in Simulated Municipal Solid Waste Incineration

TG-FTIR analysis of PVC thermal degradation and HCl removal

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Characteristics of Molten Salt Gasification of Waste PVC

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

INDUSTRIAL EXPERIMENT STUDY ON CHLORID EMISSION AND DECHLORINATION TECHNOLOGY

Study on HCl Removal for Medical Waste Pyrolysis and Combustion Using a TG-FTIR Analyzer

Dechlorination and fuel gas generation in chemical looping conversion of waste PVC over inherently Na/Ca/K-containing bauxite residue-based oxygen carriers

Behavior and Control of Chlorine in Dyestuff Residue Incineration

Fate of sodium and chlorine during the co-hydrothermal carbonization of high-alkali coal and polyvinyl chloride