Abstract:Mechanical behaviour of twenty-eight longitudinal lap-welded joints made of high strength steels (HSS) under tension load was investigated by experimental and numerical study. Weaknesses due to traditional deformation measurements for fillet welded joints can be perfectly solved by digital image correlation techniques (DIC). Distribution and development of strain field throughout the specimens along the whole loading process were recorded by DIC measurement. The effect of parameters (e.g. weld size, weld length and mismatch ratio) on mechanical properties (e.g. ultimate strength, failure modes, weld ductility and fracture angle) of longitudinal fillet welds and transverse fillet welds, which was introduced in detail in previous work by the authors, were compared. Generally, because of the difference on the combination of shear force and tension force, the fracture angle of longitudinal welded specimens (around <math>50∘</math>) were much more divergent from transverse welded specimens (around <math>20∘</math>) even though both of them failed at welded zone (welded zone only refers to weld metal in this paper), resulting that the mean strength of longitudinal welded specimens were only 0.58 time of transverse welded specimens. Conversely, the mean deformation capacity of longitudinal welded specimens was almost 4.0 times of transverse welded specimens. All longitudinal welded specimens have "platform" or "decline" feature while all transverse welded specimens have "rise" or "platform" feature load-deformation curves. Generally, the specimens with "rise" feature load-deformation curve are more likely to suffer sudden fracture, while specimens with "decline" or "platform" feature have satisfactory ductility performance. Based on the strain distribution and development features provided by DIC measurement, a new strength criterion, in which the ultimate strain obtained in relevant coupon tests was an indicator, was proposed and through the comparison between the numerical results and test results, its validation was verified by FE simulation. Moreover, it was confirmed that the predicted loads of EC3 and AISC Specification were close and slightly conservative for all specimens.

Experimental Investigation on the Mechanical Properties of Weld Metal in Tailor Welded Blanks

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

Study on Formability of Tailor Welded Blanks Based on Numerical Simulation

Investigation on the Formability of Tailor-Welded Blanks

Impact Modeling of the Weld Line of Tailor-Welded Blank

Calculation of Free-Bend Load for Tailor Welded Blanks with Dissimilar Thickness

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Numerical Simulation and Experimental Study on the Weld-Line Movement of Tailor-Welded Blank

Research on Formability of Tailor-welded Blanks with Different Thickness in Door Inner Stamping

The Forming Limits Prediction Model for Tailor Welded Blank with Straight Seam

Mechanical Behavior of Laboratory Cross-Weld Specimen and its Relation with Practical Cases at Elevated Temperature

Numerical Simulation on Formability of Tailor-Welded Blank with Curved Weld-Line under Different Blank Holder Forces

Research on Welding Microstructure and Tensile Performance of HSA 340 High-Strength Laser Welding-Tailored-blanks

Comparison of different welding methods on mechanical properties and formability behaviors of tailor welded blanks (TWB) made from AA6061 alloys

Experimental and numerical study on strength of high-strength steel double-V butt-welded joint

A Tensile Specimen of Tailor Rolled Blanks with Equal Probability in Yield and Its Mechanical Behavior Analysis

A Study on Laser Weldability and Formability of High Thickness Ratio Tailor Welded Blanks

Experiment of Butt-Welded Connections Subjected to Axial Tension

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

A New Weld Shaping Method with Trailing Impact Rolling and Tensile and Fatigue Properties for Equal Load-Carrying Capacity Joints

Numerical analysis of stress & strain and thickness variation in single point incremental forming of tailor welded steel blanks