Abstract:Modification of calcium carbonate particles with surfactant significantly improves the properties of the calcium carbonate coating on paper. Unmodified and CTAB and oleate-modified calcium carbonate nanoparticles were prepared using the wet carbonation technique for paper coating. CTAB (cationic surfactant) and sodium oleate (anionic surfactant) were used to modify the size, morphology, and surface properties of the precipitated nanoparticles. The obtained particles were characterized by XRD, FT-IR spectroscopy, zeta potential measurements, TGA and TEM. Coating colors were formulated from the prepared unmodified and modified calcium carbonates and examined by creating a thin coating layer on reference paper. The effect of calcium carbonate particle size and surface modification on paper properties, such as coating thickness, coating weight, surface roughness, air permeability, brightness, whiteness, opacity, and hydrophobicity, were investigated and compared with GCC calcium carbonate-coated papers. The obtained calcium carbonate nanoparticles are in the calcite phase. The morphology of the prepared calcium carbonate nanoparticles is rhombohedral, and the average particle diameter is <100 nm. Compared to commercial GCC, the use of unmodified and CTAB- and oleate-modified calcium carbonate nanoparticles in paper coating improves the properties of paper. The highest measured paper properties were observed for paper coated with oleate-modifed nanoparticles, where an increase in smoothness (decrease in paper roughness) (+23%), brightness (+1.3%), whiteness (+2.8%), and opacity (+2.3%) and a decrease in air permeability (-26%) was obtained with 25% less coat weight. The WCA at 10 min was about 112{\deg} for the paper coated with oleate-modified nanoparticles and 42{\deg} for paper coated with CTAB-modified nanoparticles compared to 104{\deg} for GCC-coated paper.

Study on the Surface Modification of Nanometer Calcium Carbonate

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

Surface Modification of Nano-calcium Carbonate by Composite Modifier

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Surface Chemical Modification of Nanosized Oxide Particles with A Titanate Coupling Reagent in Isopropanol

Surface Modification of Halloysite/Sericite

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

Study on Modification of TiO2 Coated on Surface of Calcined Kaolin

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Organic modification of nano-SiO2 particles in supercritical CO2

Study on synthesis and modification of Ti/Ce composite oxide

The study on surface modification process of nanometer CeO2

Effect of Cationic and Anionic Surfactants on the Application of Calcium Carbonate Nanoparticles in Paper Coating

Study on modification of nano-TiO_2 coated on surface of purified diatomite

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Organic Modification On The Sub-Micron Particles Of Tio2 Pre-Coated With Sio2 And Al2o3

Wet mechanochemical surface modification of calcite employing an integration of conventional design and analytical hierarchy process