Abstract:Surface modification of Ar plasma-pretreated SiLK film coating on a (100)-oriented silicon wafer (SiLK-Si substrate) via UV-induced graft copolymerization with 4-vinylpyridine (the 4VP-g-SiLK-Si surface) or 1-vinylimidazole (the VIDz-g-SiLK-Si surface! was carried out to promote the adhesion with the electrolessly deposited copper. The surface composition of the graft-copolymerized SiLK-Si substrates was characterized by X-ray photoelectron spectroscopy. The topography of the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces was investigated by atomic force microscopy. The 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces could be activated by PdCl2 in the absence of prior sensitization by SnCl2 (the Sn-free activation process! for the subsequent electroless deposition of copper. The 180degrees-peel adhesion strength of the electrolessly deposited copper on the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces reaches about 6 and 5 N/cm, respectively. These adhesion strength values were much higher than those of the electrolessly deposited copper on the pristine and Ar plasma-treated SiLK-Si surfaces. The strong adhesion of the electrolessly deposited copper to the VIDz-g-SiLK-Si and 4VP-g- SiLK-Si surfaces was attributed to the synergistic effect of the strong interaction between the pyridine or imidazole functional groups of the grafted polymers with copper atoms, the spatial distribution of the graft chains on the SiLK surface and into the metal matrix, and the fact that the graft chains were covalently tethered on the SiLK surface. (C) 2002 The Electrochemical Society.

Electroless plating of copper through successive pretreatment with silane and colloidal silver

A New Approach on the Active Treatment for Electroless Copper Plating on Glass

Electroless Ag plating on self-assembly monolayer

Efficient copper plating on glass substrates through amine-functionalized nanocomposite-immobilized silver nanoparticles

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Self-assembly monolayer of mercaptopropyltrimethoxysilane for electroless deposition of Ag

Selective Deposition of Conductive Copper Films on Glass Surfaces Using Femtosecond Laser Surface Modification and Electroless Plating

Copper Pattern on Self-Assembled Monolayer Through Microcontact Printing

Formation of copper electrodeposits on an untreated insulating substrate

Electroless Metallization of Glass Surfaces Functionalized by Silanization and Graft Polymerization of Aniline

Selective preparation of metal copper layer on silicate glass by laser surface modification

Preparation And Characterization Of Electroless Copper Coating On Hollow Glass Microspheres

Electroless Silver Plating on Through-glass Via (TGV) As an Adhesive and Conducting Layer

Electroless plating nanocrystalline Cu film on glass substrate

Chemical Deposition of Thin Films of Copper Sulfide on Glass Surfaces Modified with Organosilanes

Study on Non-Cyanide Silver Electroplating with Copper Substrate

Cyanide-free Silver Immersion Deposition Involving 3-Mercapto-1-propanesulfonic Acid for Copper Finishing

NANO-STRUCTURED SILVER COATING ON COPPER PREPARED IN AN ETHANOL-BASED SOLUTION

A New Activation Method For Electroless Metal Plating: Palladium Laden Via Bonding With Self-Assembly Monolayers

Initiatively embedding silver colloids in glass used in silver paste to improve metallization ohmic contact on silicon wafers

Electroless silver plating for metallization of near-field optical fiber probes