Abstract:Glass interposer has attracted ever-increasing attention in 2.5D/3D advanced packaging field due to its excellent mechanical performance, thermal stability, easy manufacturing process and low cost. However, the poor adhesion between the glass surface and the deposited metal layer is a severe issue resulting from the smoothness of the glass surface, which limits its widespread applications. Herein, a novel method for realizing the direct copper electroplating on TGV is presented on the basis of a silver nanowire (AgNW) conductive composite. A pre-coat containing resin is firstly applied to the glass substrate as an adhesion layer. The glass substrate, on the other hand, requires only a simple cleaning process. The AgNW is then coated on the resin layer to form the conductive seed layer. Finally, the metallization of the TGV surface is rapidly achieved by direct copper electroplating. For TGVs with a diameter of 100 μm and a thickness of 500 μm, the surface morphology characterization indicates AgNW conductive composite is successfully coated on the TGV surface with a sheet resistance of approx. 39 Ω sq-1, leading to rapid activation of the copper electroplating. The metallographic microscopy proves the asplated copper exhibits excellent coverage and plating uniformity across the TGV at 2 A/dm2 for 40 min. To further evaluate the practical performance of the as-plated copper on glass, the adhesion of the deposited copper is conducted by tape-test technique under ASTM D3359-02. The results show the copper layer has strong adhesion to the glass. Our work provides an efficacious method to directly achieve the metallization of TGV with the advantages of high metal adhesion, simple and cost-effective process. Therefore, this approach has prominent potential for application in 2.5D/3D advanced packaging.

Efficient copper plating on glass substrates through amine-functionalized nanocomposite-immobilized silver nanoparticles

Electroless plating of copper through successive pretreatment with silane and colloidal silver

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Facile process for surface metalization: Rational design of Ag nanoparticle/polymer brush toward high-efficiency electroless plating

Electrodeposition of AgCuO2 Nanoplates

Silver Nanoparticle Catalyst for Electroless Ni Deposition and the Promotion of Its Adsorption Onto PET Substrate

Directly Electroplated Metallization on Through Glass Via (TGV) Using Silver Nanowires Conductive Composite as Seed Layer

Fabrication and Wettability of Nanoporous Silver Film on Copper from Choline Chloride-Based Deep Eutectic Solvents

Laser-induced Pattened Deposition of Silver Nanoparticles on Glass

Rapid metallization by copper electroplating on insulating substrate using silver nanowires conductive composite as seed layer

Advanced Ag nanoparticles for the catalyzation of glyoxylic acid oxidation in through-holes electroless copper metallization

Formation of copper electrodeposits on an untreated insulating substrate

Silver nanoparticles-coated 2D glass-flakes reinforced polyurea composites with high thermal conductivity, acceptable toughness and thermal stability

Improving Electroless Ag Plating by Depositing Graphene Oxide/Polymer Composite Film on the Ag Layer for Corrosion Protection

Effect of Flake Silver-Plated Copper Particles on the Property Enhancement of Electrically Conductive Adhesives.

Electroless plating of copper on carbon fiber surfaces and corresponding mechanism

Maillard Type Reaction for Electroless Copper Plating onto Ceramic Nanoparticles

A facile process to fabricate electroless plating on PET sheet: Effects of surface roughness on adhesive force, electronic and structural properties of copper coating

Synthesis of Pt-CuO/RuO2 composites by dealloying from metallic glass and their ethanol electrooxidation performance

Direct additive copper plating on polyimide surface with silver ammonia via plasma modification

PREPARATION AND PROPERTIES OF SiO2/Ag MICROBEADS USING ELECTROLESS PLATING METHOD