Abstract:In order to expand the applications of cold-formed thin-walled steel structures, this study proposes a new type of composite wallboard composed of cold-formed thin-walled C-shaped steel and multi-layer concrete, in which C-shaped steel serves as the skeleton, foam concrete acts as the thermal insulation material, and fine aggregate concrete and cement mortar play the part of envelopes. The composite wallboard can be made in a factory assembly line, meeting the requirements of the building (civil and structural) industry. Two steel-frame composite wallboard shear walls were subjected to reciprocating loading, with the connection mode as the design parameter, to investigate the seismic performance of the structure. The failure mode, hysteresis curve, skeleton curve, strength degradation, stiffness degradation, ductility, and energy dissipation capacity of the specimens were analyzed. On this basis, the finite element (FE) model of the steel-frame composite wallboard was established, and the model's accuracy was verified by comparing the bearing capacity and the skeleton curve. Results show that the structure shows shear failure characteristics, and the cement mortar layer and the fine aggregate concrete layer are separated from the C-shaped steel after being crushed. The infilled foam concrete is also crushed, and the welding seams between the extended C-shaped steel and steel frame of the WP-1 specimen are damaged. The hysteresis curves of the two specimens have a clear pinch, but the area enclosed by the hysteresis loop is large, and the energy dissipation capacity is also present. The yield load and ultimate load of the WP-2 specimen are higher than those of the WP-1 specimen, indicating that the higher the connection strength between the composite wallboard and the steel frame, the greater the ultimate carrying capacity of the specimen. The established FE model can accurately estimate the seismic performance of steel-frame composite wallboard shear walls.

A state-of-the-art review of composite shear walls under cyclic loading

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

State-of-the-art Review on Steel-Concrete Composite Walls

A review of the behaviour and design of steel–concrete composite shear walls

Seismic behavior of high strength concrete composite walls with embedded steel truss

Research advances of composite shear walls with double steel plates and filled concrete

A review on long‐term behaviour of steel‐concrete composite structures

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

RESEARCH PROGRESS OF SHEAR WALLS: TYPES AND DESIGN METHODS

Steel-concrete-steel sandwich composite structures: A review

Experimental Study of Rectangular Multi-Partition Steel-Concrete Composite Shear Walls

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Nonlinear Finite-Element Analysis of Double-Skin Steel-Concrete Composite Shear Wall Structures

Experimental Study on the Seismic Behavior of Innovated CTSRC Composite Shear Walls for Multi-Story Residences

Comparative study of different steel‐concrete composite shear walls

Cyclic behavior of high-strength concrete shear walls with high-strength reinforcements and boundary CFST columns

Seismic behavior of composite frame infilled composite steel plate shear walls

Anti-Seismic Test Study on the Grid-Tube-Type Double Steel Plate and Infilled Concrete Composite Shear Wall

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls