Abstract:Abstract The composite wall with encased steel braces (ESB wall) is a novel type of steel–concrete composite wall that consists of a steel braced frame embedded in reinforced concrete. This arrangement is supposed to enhance the seismic performance of the wall, as the steel columns encased in the boundary elements can increase the flexural strength of the wall and the steel braces encased in the web can increase the shear strength. ESB walls have seen use in super tall building structures constructed in regions of high seismicity. The ESB walls are commonly used on stories where the shear force demand is very high. Currently, no design guidelines exist for the design of ESB Walls in the Eurocode. More research is required before a distinct set of guidelines can be prescribed for the design of ESB Walls. The present research will investigate behavior of composite walls with encased steel braces (ESB walls). Time history analysis will be performed to examine the shear strength and stiffness of the ESB walls. In this study, two frames with three floors and five floors will be modeled in ABAQUS software. Then the X- shaped braces and inverted V brace is added to frames. Later, reinforced concrete shear wall will be added to braced frames, so the steel braces encased in the reinforced concrete shear wall. Time history analysis, on the braced frames will be done Compare and note with each other. The results of the study are in good agreement with those of previous studies. However, none of these studies examined the effect of using V- and X-shaped struts and shear walls simultaneously, nor did they examine which struts reinforce the structures more strongly against earthquake vibrations. This has led the study to examine the effect of these reinforcements under various earthquakes. In future studies, reinforced concrete structures can also be used in addition to steel structures, and the results can be compared. In addition, these braces can also be used in other parts of the building. To meet this objective, one can use the very important data provided in this thesis, and ultimately better and more accurate results can be extracted using this approach. The main aim of this thesis is to study the effect of increasing the number of floors on how to extend the stress on the building structure. To this end, the number of floors increased from three to five. Therefore, it can be concluded that an increase in the number of floors also more than 5 storey causes stress values, but these modes are quite consistent with the three- and five-storey buildings.

Comparative study of different steel‐concrete composite shear walls

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Practical application of design and construction of steel shear walls

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

State-of-the-art Review on Steel-Concrete Composite Walls

Experimental study on out-of-plane shear resistance of steel-concrete composite wall structures

Experimental Study on the Seismic Behavior of Innovated CTSRC Composite Shear Walls for Multi-Story Residences

Nonlinear Finite-Element Analysis of Double-Skin Steel-Concrete Composite Shear Wall Structures

Experimental study and design method of shear-dominated composite plate shear walls

Analysis of Concrete Filled Square Steel Tubular Frame-Steel Plate Shear Wall Structural Systems

Effective Stiffness of Steel Plate-Concrete Composite Shear Wall Structures under Normal Status

Experimental Study of Rectangular Multi-Partition Steel-Concrete Composite Shear Walls

Study of the Seismic Performance of Composite Shear Walls with Embedded Steel Truss For Use in High-rise Buildings

Research on shear resistance of cold-formed steel stud composite walls

Study on Cooperative Working Performance of Reinforced Concrete Core Wall-steel Frame Hybrid Structures

Parametric Study of Composite Shear Wall with Embedded Steel Truss

A review of the behaviour and design of steel–concrete composite shear walls

Comparative Study On Steel Plate Shear Walls Used In A High-Rise Building