Abstract:<p>Nowadays, great attention has been arisen on steel-plate composite (SC) walls, but studies on SC wall-to-foundation connections were rarely reported. In this paper, eight large-scale specimens were designed and tested to investigate the in-plane and out-of-plane behavior of SC wall-to-foundation connections subjected to combined axial compression and cyclic lateral-force. Test parameters mainly included the loading direction (in-plane and out-of-plane), construction detail of the connection (lap-splice and embedding) and the aspect ratios or height-to-thickness ratios of SC walls. The effects of test parameters on SC wall-to-foundation connection performance were discussed. For test specimens subjected to in-plane loading, results showed that the specimens all failed by flexure. For specimens subjected to out-of-plane loading, the specimens with the wall height-to-thickness ratio of 1.33 and 2.5 failed by shear and flexure-splitting, respectively. The lap-splice connection could be regarded as an over-strength connection since failure usually occurs on the connection while the embedding connection could be designed as a full-strength connection where the SC wall itself fails, according to AISC N690s1-15. The lap-splice connections had better ductility than embedding connections. The specimens with larger SC-wall aspect ratios or height-to-thickness ratios had better ductility. The current expressions for the in-plane and out-of-plane load-carrying capacities of SC walls were evaluated based on the test results. The comparison showed that the current expressions generally underestimated the load-carrying capacities of the specimens. Since both construction details of lap-splice and embedding had been proven feasible for practical use in SC wall-to-foundation connections, further studies on the design of both connection types were recommended.</p>

A review of the behaviour and design of steel–concrete composite shear walls

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

State-of-the-art Review on Steel-Concrete Composite Walls

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Seismic behavior of composite frame infilled composite steel plate shear walls

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Steel-concrete-steel sandwich composite structures: A review

Global Buckling Design of Multi-Celled CFST Walls with Four Simply-Supported Edges

A review on long‐term behaviour of steel‐concrete composite structures

Compressive Behavior of Slender Profiled Double-Skin Composite Walls

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

A state-of-the-art review of composite shear walls under cyclic loading

Experimental study and design method of shear-dominated composite plate shear walls

Behavior of Steel Tube-Reinforced Concrete Composite Walls Subjected to High Axial Force and Cyclic Loading

Behavior of eccentrically loaded rectangular CFST components for shear walls using double horizontally-corrugated steel plates

Cyclic behavior of high-strength concrete shear walls with high-strength reinforcements and boundary CFST columns

Seismic behavior and shear capacity prediction of coupled concrete‐filled multicellular steel tube composite shear walls

Seismic behavior of double steel plate–HSC composite walls

Experimental study on steel-plate composite wall-to-foundation connections subjected to combined axial compression and cyclic lateral-force

Axial Compressive Behavior of Multi-Celled Corrugated-Plate CFST Walls: Tests and Numerical Simulations