Abstract:This work is devoted to the development and validation of a new 3D DEM-based (Euler-Lagrange) model for the steam reforming of methane in a tube filled with spherical catalyst particles (Ni/<math>α</math>-Al2O). The new model includes five gaseous chemical species (CH4, CO2, CO, H2O, H2). The model uses reaction rate expressions taken from the literature (Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetics). The main novelty of the model is its ability to account for the intraparticle heat and mass transfer for each individual particle coupled with the heat and mass transfer between the particles and the bulk flow. The model is validated against results from a comprehensive particle-resolved 3D-CFD-based model published in the literature. This 3D benchmark case corresponds to a 0.7 m length of packed tube, that consists of 807 spherical catalyst particles at a tube-to-particle diameter ratio of <math>N=5.96</math>. The comparison between our DEM-based model and 3D benchmark results demonstrates a good agreement comprising of 4 K (1%) difference in the temperature of outflow gas phase and up to 3% differences in the composition of outflow gas. Additionally, this new model is compared with a partial equilibrium model, which uses chemical equilibrium inside the catalyst particles and mass transfer rates between the particle surface and gas flow to calculate the reaction rate expressions. The performances of these new models are illustrated using additional simulations for the same packed bed taking into account thermal radiation. Finally, we validate our model against 2D simulations of an industrial scale reformer-tube published in the literature. Good agreements were demonstrated.

Modeling of a metal monolith catalytic reactor for methane steam reforming–combustion coupling

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Cold modeling of a direct coupling autothermal methane reforming reactor

Modeling of Diffusion and Reaction in Monolithic Catalysts for the Methanol-to-propylene Process

Numerical investigation of a multichannel reactor for syngas production by methanol steam reforming at various operating conditions

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

Performance Simulations of a Compact Plate Methane Steam Reformer Using an Electrically Heated Alumite Catalyst

Topology optimization of the catalyst distribution of planar methane steam reformers

STEAM REFORMING OF METHANE IN CATALYTIC MICROREACTORS FOR HYDROGEN PRODUCTION

Computational Fluid Dynamics Modeling of Thermally Integrated Microchannel Reforming Reactors for Hydrogen Production

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Unsteady temperature fields of monoliths in catalytic converters

DEM-based model for steam methane reforming

Study on the Laws of Methanol Reforming Coupled with Flow, Heat and Mass Transfer Processes with Variable Catalyst Distribution in Microchannels

Three-Dimensional Computation Fluid Dynamics Simulation of CO Methanation Reactor with Immersed Tubes

Two-Dimensional Coaxial Model for A Cylinder Methane Steam Reformer Using A Novel Plate Catalyst

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Dynamics Simulations of a Novel Heat-Exchange Methane Reformer Using an Eelectrically Heated Alumite Catalyst

NUMERICAL SIMULATION OF ENHANCED CONVECTION HEAT TRANSFER USING METHANE-STEAM REFORMING IN CATALYST FILMS IN A VERTICAL TUBE