Abstract:The growing consumption of light olefins has stimulated intensive researches on methanol to olefin (MTO) process which possesses great advantages for coal conversion to value-added chemicals in an environmentally benign way. The catalysts commonly used for MTO process faces several challenges such as poor selectivity control, low hydrothermal stability and short lifetime. In the present study, we prepared a series of mordenite zeolites with variable Al contents (Si/Al molar ratios of 51−436) by a sequential dealumination treatment of air-calcination and acid leaching. The textural properties, acidity and Al location before and after the dealumination treatment have been systematically studied and their effect on MTO especially the methanol to propylene (MTP) performance was thoroughly investigated. The mordenite zeolites with the Si/Al ratios over 150 selectively catalyzed methanol conversion in the MTP pathway, providing a high propylene selectivity of 63% and propylene/ethylene ratio of > 10. Compared to the low-silica MOR catalysts, highly dealuminated MOR showed much higher stability and longer lifetime, which can be further enhanced <em>via</em> harsh hydrothermal pretreatment. Furthermore, the lifetime was highly related to the crystal size along <em>c</em>-axis. The excellent performance of highly dealuminated MOR is likely ascribed to the mesopores formed upon dealumination and the scarce Al sites located in the T sites shared by the 8-member ring (MR) side pockets and 12-MR pore channels.The high-silica MOR catalysts (Si/Al >150) selectively catalyzed the methanol conversion in the methanol to propylene (MTP) way, providing a high propylene selectivity of 63% and a long lifetime of ~130 h. The excellent performance of highly dealuminated MOR is ascribed to the mesopores formed upon dealumination and the scarce Al sites located in the T sites shared by the 8-MR side pockets and 12-MR pore channels as well as the weakened acid strength.

Modeling of Diffusion and Reaction in Monolithic Catalysts for the Methanol-to-propylene Process

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Methanol to propylene process using moving bed technology and its engineering study

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Pore Plugging Effects on the Performance of ZSM-5 Catalyst in MTP Reaction Using a Discrete Model

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Methanol to Propylene over Foam SiC-Supported ZSM-5 Catalyst: Performance of Multiple Reaction–Regeneration Cycles

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

High Throughput Research and Development of Catalysts for Converting Methanol into Propylene

Multiphase catalytic reactors for methanol to olefins

Selective conversion of methanol to propylene over highly dealuminated mordenite: Al location and crystal morphology effects

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Highly Selective Conversion Of Methanol To Propylene: Design Of A Mfi Zeolite With Selective-Blockage Of (010) Surfaces