Abstract:A full self-consistent model (FSCM) of the axisymmetric adhesive contact between a rigid punch with an arbitrary surface shape and a power-law graded elastic half-space is developed. The self-consistent equation between the surface gap and the surface interaction (e.g., the Lennard-Jones force law) involves a nonlinear singular integral, posing a great challenge to numerical calculations. By applying the properties of Gauss's hypergeometric function, the integral singularity is eliminated in the numerical calculation through Riemann-Stieltjes integral. Case studies for power-law punch profiles are performed and the self-consistent equation can be expressed in a dimensionless form with three dimensionless parameters, namely a shape index, a gradient exponent, and a new generalized Tabor number. The FSCM results are obtained by solving the self-consistent equation through the surface central gap control method and Newton-Raphson iterative method. For large generalized Tabor numbers, the force- displacement curves are 'S-shaped' and condense to the extended JKR limit in the high-load branch. As the generalized Tabor number decreases, a continuous transition from the extended JKR model to the Bradley model for the adhesion of power-law graded materials is obtained. It is found that the pull-off force of a graded material usually depends on the three dimensionless parameters, but for some cases of the shape index, it is not sensitive to the gradient exponent when the generalized Tabor number is fixed. Asymptotic solutions are derived to predict the unstable jump points, which coincide well with the FSCM predictions. The FSCM is applied to validate the extended Maugis-Dugdale (M-D) model of graded materials and it is found that the accuracy of the original M-D-n-k model using the maximum strength condition to determine the cohesive stress is limited. By introducing the rigid-limit-consistency condition of the pull-off force to determine the cohesive stress, the M-D-n-k model is improved and its predictions show good consistency with the FSCM results.

Adhesive Contact Between Flat Punches with Finite Edge Radius and an Elastic Half-Space

A Unified Treatment of Axisymmetric Adhesive Contact on A Power-Law Graded Elastic Half-Space

Contact problem of two punches in an elastic coating attached to a porous material

Adhesive Contact of Flat-Ended Wedges: Theory and Computer Experiments

On the Contact and Adhesion of a Piezoelectric Half-Space under a Rigid Punch with an Axisymmetric Power-Law Profile

Axisymmetric Indentations of an Elastic Half-Space with Tensed Surface/Membrane in the Johnson–Kendall–Roberts Adhesive Approximation

Mechanics of adhesive contact on a power-law graded elastic half-space

A Generalized Maugis-Dugdale Solution for Adhesion of Power-Law Graded Elastic Materials

Effect of Adhesion on the Frictionless Receding Contact Between an Elastic Layer and a Substrate

Theory of Adhesive Contact on Multi-Ferroic Composite Materials: Conical Indenter

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

Adhesion of Graded Elastic Materials: A Full Self-Consistent Model and Its Application

Adhesion of smoothly flat-ended wedges

Research on Adhesion Pull-Off Behavior of Rigid Flat Punch and Viscoelastic Substrate

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Adhesive Contact Model and Calculation of Micro-Mechanical Systems

Two-dimensional finite element analysis of elastic adhesive contact of a rough surface

On piezoelastic contact problem for a smooth punch

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces

Using the Dugdale Approximation to Match A Specific Interaction in the Adhesive Contact of Elastic Objects

Partial Slip Contact Between a Rigid Punch with an Arbitrary Tip-Shape and an Elastic Graded Solid with a Finite Thickness