Non-adhesive and adhesive contacts of an elastic quarter-or eighth-space with freely sliding sides

Qiang Li,Valentin L. Popov

DOI: https://doi.org/10.1007/s40544-024-0866-7

IF: 4.924

2024-06-16

Friction

Abstract:The contact of an elastic quarter- or eighth-space is studied under the condition that the movement of the side surface of the quarter-space is constrained: It can slide freely along the plane of the side surface but its normal movement is blocked (for example, by a rigid wall). The solution of this contact problem can be easily achieved by additionally applying a mirrored load to an elastic half-space. Non-adhesive contact and the Johnson-Kendall-Roberts (JKR)-type adhesive contact between a rigid sphere and an elastic quarter-space under such a boundary condition is numerically simulated using the fast Fourier transform (FFT)-assisted boundary element method (BEM). Contacts of an elastic eighth-space are investigated using the same idea. Depending on the position of the sphere relative to the side edge, different contact behavior is observed. In the case of adhesive contact, the force of adhesion first increases with increasing the distance from the edge of the quarter-space, achieves a maximum, and decreases further to the JKR-value in large distance from the edge. The enhancement of the force of adhesion compared to the half-space-contact is associated with the pinning of the contact area at the edge. We provide the maps of the force of adhesion and their analytical approximations, as well as pressure distributions in the contact plane and inside the quarter-/eighth-space.

engineering, mechanical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the non - adhesive and adhesive contact behaviors between the elastic quarter - space and eighth - space and the rigid sphere under specific boundary conditions. Specifically, the paper studies the mechanical behaviors of these contact areas when the sides of the quarter - or eighth - space can slide freely along the plane but their normal motions are blocked (for example, leaning against a rigid wall).

### Main research contents:
1. **Non - adhesive contact**:
- The non - adhesive contact behaviors of the rigid sphere with the elastic quarter - space and eighth - space at different positions were studied.
- The relationships of the normal force, the average contact radius and the pressure distribution with the distance from the sphere to the side were analyzed.
- Analytic approximation formulas for these dependencies were provided.

2. **Adhesive contact**:
- The adhesive contact of the rigid sphere with the elastic quarter - space and eighth - space was simulated by the boundary element method (BEM) assisted by the fast Fourier transform (FFT).
- The relationship of the adhesive force with the distance from the sphere to the side was studied, and it was found that the adhesive force first increases and then decreases within a certain distance range, and reaches the maximum at some positions.
- Special attention was paid to the "pinning" effect at the edge of the contact area, which leads to the enhancement of the adhesive force.

### Key findings:
- **Non - adhesive contact**:
- When the sphere is located near the edge, the normal force and the contact radius are significantly reduced.
- As the sphere moves away from the edge, the normal force gradually approaches the complete Hertz contact solution.
- The peak of the pressure distribution is not located at the center of the sphere, but slightly deviated from the edge.

- **Adhesive contact**:
- The adhesive force is low when the sphere is close to the edge, and first increases and then decreases as the distance increases.
- The maximum adhesive force of the quarter - space is \( F_{\text{ad}} = 1.152 F_{\text{JKR}} \), which is reached when \( L \approx 1.5 a_{\text{JKR}} \).
- The maximum adhesive force of the eighth - space is \( F_{\text{ad}} = 1.67 F_{\text{JKR}} \), which is reached when \( L_y = L_x = 1.7 a_{\text{JKR}} \).

### Significance:
This research provides an important theoretical basis for understanding the contact behaviors under complex geometries, especially in engineering applications involving edge effects, such as railway wheel - rail contact and gear transmission. Through numerical simulation and analytic approximation, the research results are helpful for optimizing the design and predicting the performance of actual contact systems.