Abstract:In order to prolong the service life of multistage axial compressors, it is increasingly important to study the influence of blade surface roughness on the compressor performance. In this paper, a five-stage axial compressor of a real aero-engine was selected as the research object, and an equivalent gravel roughness model was used to model the roughness based on measured blade surface roughness data. Furthermore, the impact of blade surface roughness on the performance at design rotational speed was studied by full three-dimensional numerical simulation, and the mechanism of performance variation caused by the roughness was discussed combined with quantitative and flow field analyses. The results show that, when the blade surface roughness of all blades increases, the peak total efficiency decreases by approximately 0.4%, the blocking mass-flow decreases by approximately 0.3%, and the stable working range changes little. When the surface roughness of all rotor blades increases, the performance decline is close to that of all rotor and stator blades, and the variation in stator blade roughness has little effect on the compressor performance. Regarding the variation in roughness, the performance of the latter stage is more sensitive than that of the previous stage, and the decline in the performance of the fifth stage contributes the most to the total performance degradation of the compressor. Once the surface roughness of the fifth-stage rotor blade increases, the flow in the middle of the rotor blade deteriorates and the stage performance decreases obviously, which is the main reason for the decline in the overall performance.

Effect of Rotor CLOCKING on Blade Aerodynamic Load in Compressor Stages

Numerical Research on Effect of Rotor CLOCKING on Blade Security in Compressor Stages

Numerical Study of Influence of Rotor Blades' CLOCKING Effect on Aerodynamic Performance of a Multistage Compressor

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Analysis of Wake/boundary Layer under Different Rotor CLOCKING Positions in a Multistage Compressor

Numerical Investigation of Compressor Rotor Blade Clocking Effects on Aerodynamic Loading of the Stator Vane

Numerical Investigation of the Effect of Stator Clocking on Blade Boundary Layer Flow in Compressor

Numerical Simulation of Rotor Clocking Effect in a Low-Speed Compressor

Clocking Effect in a Two-Stage Compressor with Different Inter-Blade-row Gaps

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Fully clocking effect in a two-stage compressor

Unsteady Blade Loading with Clocking in Multistage Axial Compressors, Part 1

Unsteady Blade Loading with Clocking in Multistage Axial Compressors, Part 2

Numerical Simulation of Clocking Effect on Blade Unsteady Aerodynamic Force in Axial Turbine

Effects of Stator Clocking on Unsteady Rotor Loading in a Low-Speed Centrifugal Compressor

Experimental Study of the Clocking Effect of Straight and Bowed Stationary Blades in a Small Axial Clearance

Effect of clocking on unsteady rotor blade loading in a low-speed axial compressor at design and off-design operating conditions

Numerical Simulation of Clocking Effect on Turbine Blade Unsteady Force

Numerical Research on Blade Dynamic Stress and Resonance under Different Rotor Circumferencial Positions in A Multi-stage Compressor

Numerical study on the clocking effect of a low-speed compressor with different inter-blade-row gaps

Influence of Blade Lean Together with Blade Clocking on the Overall Aerodynamic Performance of a Multi-Stage Turbine