Abstract:The superimposed influences of the blade rows in a multistage compressor are important because different matches of upstream and downstream blades can result in significant differences in the stator wake oscillation. Numerical investigation of the axial stator wake oscillation, which is affected upstream by the axial rotor and downstream by the radial rotor, was performed in an axial-radial combined compressor. Many configurations with different blade numbers and locations, which influence axial stator wake oscillation were investigated. When rotors have equal blade numbers, the axial stator wake oscillates periodically versus time within time T (moving blade passing 1/3 revolution). In contrast, stator wake oscillates irregularly within T when rotors have different blade numbers. A model-split subtraction method is presented in order to separate the influences of the individual blade rows on the wake oscillation of the axial stator. Analysis from the rotor-stator configuration showed that the unsteady flow angle fluctuation response is caused by the upstream rotor. For the rotor-stator-rotor configuration, the unsteady flow angle fluctuations are influenced by up- and downstream blade rows. With the model-split subtraction method, the up- and downstream influences on the flow angle fluctuation could be clearly separated and quantified. Low amplitudes could be observed when the influences from up- and downstream moving rows were superimposed with the "positive peak- negative peak" type wave. Clocking investigations were carried out to change the relative superimposed phase of influences from the surrounding blade rows in order to modulate the amplitudes of the axial stator wake oscillation. However, the amplitudes did not reach the maximum when they were superimposed with "positive peak-positive peak" type wave due to the impact of the interaction between the two moving blade rows.

Numerical Research on Effect of Rotor CLOCKING on Blade Security in Compressor Stages

Effect of Rotor CLOCKING on Blade Aerodynamic Load in Compressor Stages

Numerical Study of Influence of Rotor Blades' CLOCKING Effect on Aerodynamic Performance of a Multistage Compressor

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Numerical Investigation of Compressor Rotor Blade Clocking Effects on Aerodynamic Loading of the Stator Vane

Numerical Investigation of the Effect of Stator Clocking on Blade Boundary Layer Flow in Compressor

Analysis of Wake/boundary Layer under Different Rotor CLOCKING Positions in a Multistage Compressor

Numerical Research on Blade Dynamic Stress and Resonance under Different Rotor Circumferencial Positions in A Multi-stage Compressor

Numerical Simulation of Rotor Clocking Effect in a Low-Speed Compressor

Fully clocking effect in a two-stage compressor

Clocking Effect in a Two-Stage Compressor with Different Inter-Blade-row Gaps

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Unsteady Blade Loading with Clocking in Multistage Axial Compressors, Part 1

Numerical Simulation of Clocking Effect on Blade Unsteady Aerodynamic Force in Axial Turbine

Effects of Stator Clocking on Unsteady Rotor Loading in a Low-Speed Centrifugal Compressor

Unsteady Blade Loading with Clocking in Multistage Axial Compressors, Part 2

Effect of clocking on unsteady rotor blade loading in a low-speed axial compressor at design and off-design operating conditions

Numerical Simulation of Clocking Effect on Turbine Blade Unsteady Force

Numerical study on the clocking effect of a low-speed compressor with different inter-blade-row gaps

Experimental Study of the Clocking Effect of Straight and Bowed Stationary Blades in a Small Axial Clearance

Numerical Investigation of the Superimposed Effects on Stator Wake Oscillation in an Axial-Radial Combined Compressor