Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

ANALYSIS OF SHEAR BEHAVIOR ON HIGH-STRENGTH BOLT BUTT CONNECTIONS

Test on shear behavior of less-tightened high-strength bolted connections

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Experimental Study of Shear Behavior of Anchor Bolt Connections at Steel Column Bases

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Analysis on Shear Behavior of High-Strength Bolts Connection

Experimental investigation of mechanical behavior of grade 8.8 and 10.9 small-sized (m14-m20) bolts with the thread into the bolt hole

Shear Behavior of Exposed Steel Column Base Joint

Models to Predict Shear Resistances of Anchor Bolts

Influence of Bolt Quality and Pitch on Shear Behaviors of High-strength Bolt Friction Connection

Influencing Factors on Bearing Performance of High Strength Bolted Connection in Stainless Steel Carried Shear Force

Finite Element Analysis on the Bearing Capacity for Connection of Sharing on a Shear Load by Friction-Type High-Strength Bolts and Side Welds

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Study on Shear Capacity of High-strength Bolted Bearing-type Joint

Analysis of axial and transverse effects of rock bolt during shearing process

Analysis of Bolt Tensile Force and Prying Force in Extended End-Plate Beam-to-Column Bolted Connections

Finite element analysis of bolt shear connection of steel-concrete composite structure

The effect of yield-to-ltimate ratio on the bolted connection under static-shear

Shear performance of high-strength bolted connections with stainless-clad steel plates in a corrosive environment

Shear Strength of Flat Joint considering Influencing Area of Bolts

Experimental study on shear performance of an advanced bolted connection in steel-concrete composite beams