Development Brief Review of Green Lubricants

Zeng Zaichun,Huang Fuchuan,Zhang Yahui,Wang Haitao,Yi Kai

DOI: https://doi.org/10.3969/j.issn.1672-4364.2008.04.006

2008-01-01

Abstract:It is analyzed the biodegradability and ecotoxicity of green lubricants form the viewpoints of base Stocks and additives,it is raised the existing problems and developing trend of green lubricants.

What problem does this paper attempt to address?

Green Chemical Engineering in China

Xiangping Zhang,Changjun Liu,Qilong Ren,Xueqing Qiu,Baohua Xu,Xintong Zhou,Yuanbang Xie,Hongming Lou,Mohammad Chand Ali,Hongshuai Gao,Yinge Bai,Suojiang Zhang

DOI: https://doi.org/10.1515/revce-2017-0038

2019-01-01

Reviews in Chemical Engineering

Abstract:In China, the rapid development greatly greatly promotes the national economic power and living standard but also inevitably brings a series of environmental problems. In order to resolve these problems fundamentally, Chinese scientists have been undertaking research in the area of green chemical engineering (GCE) for many years and achieved great progresses. In this paper, we reviewed the research progresses related to GCE in China and screened four typical topics related to the Chinese and screened four typical topics related to the Chinese resources characteristics and environmental requirements, i.e. ionic liquids and their applications, biomass utilization and bio-based materials/products, green solvent-mediated extraction technologies, and cold plas-mas for coal conversion. Afterwards, the perspectives and development tendencies of GCE were proposed, and the challenges which will be faced while developing available industrial technologies in China were mentioned.
RESEARCH AND APPLICATION OF ENVIRONMENTALLY FRIENDLY LUBRICANT

曲建俊,陈继国,李强

DOI: https://doi.org/10.3969/j.issn.1002-3119.2008.05.001

2008-01-01

Abstract:The definition,history,present status and application of environmentally friendly lubricant are summarized.The principal ingredient of environmentally friendly lubricant is thoroughly described.At the same time,test methods of the biodegradability and ecological toxicity are reviewed.It is also pointed that it is urgent to research and develop the environmentally friendly lubricant.
Development and Utilization of the Environmental Benign Lubricant

Youwei Du,Jie Zhu,C Sinopec

2006-01-01

Abstract:In recent years,due to growing environmental concerns, the higher requirements had been proposed for the utilization of lubricants.That is to say,in addition to the conventional function,the lubricants would possess less toxicity and better biodegradability.Some researches demonstrated that plant oils,synthetic esters and some low viscosity poly-alpha olefins etc could fulfill the criteria when proper selection was conducted.In this work,the definition of environmental benign lubricant and its development and utilization status are described briefly.And the two aspects of the environmental benign lubricants,base oil and additive were summarized.In conclusion,the environmental benign lubricants should be the trend of development for the lubricants in the future.
Development of Environmental friendly lubricants

Du Yong,Liu Hongyan,Zhang Chunhui,Zhu Jianhua

DOI: https://doi.org/10.3969/j.issn.1672-4364.2005.04.006

2005-01-01

Abstract:It is introduced the environmental friendly lubricant from the aspects of base oil and additive. It is considered that we should strengthen the research of environmental friendly lubricants.
An Experimental Study of Antirust Additives Ratio for Green Water-Based Lubricant

F. G. Yan,S. Yan,F. Lu,B. Lin

DOI: https://doi.org/10.4028/www.scientific.net/msf.697-698.88

2011-01-01

Materials Science Forum

Abstract:In recent years taking into account the environmentally friendly property and low viscosity of water, water lubrication technology has been developing rapidly. However, the water itself contains easily-rust metal. Thus in order to meet the need of the spindle system of our research, we need to add antirust additives in water. Through the analysis of antirust additive, suitable composition of water-based antirust additive is obtained, and a new water-based lubricant is formed. Through orthogonal experiments of testing antirust properties, the optimal formula of lubricant is gained, and the ratio of various additives is confirmed.
A review on the menagerie of green fluids and nanoparticles to develop sustainable biolubricant technologies.

D.F. Silva-Alvarez,I. Dominguez-Lopez,M.A. Vidales Hurtado,C. Gutierrez-Antonio,K.A. Flores-Garay,A.L. Garcia-Garcia

DOI: https://doi.org/10.1016/j.eti.2024.103532

IF: 7.758

2024-01-10

Environmental Technology & Innovation

Abstract:The environmental problems caused by using fossil fuels to sustain the present level of industrialization have kindled worldwide interest in developing sustainable lubrication technologies to reduce the impact of friction and wear, estimated at 23% of the energy currently produced globally. Besides good lubricity, such technologies must exhibit biodegradability, renewability, and environmental innocuousness. The present survey delves into state-of-the-art biolubricant formulations based on vegetable oils, ionic liquids, aqueous solutions, and glycerol. We focus on their tribological performance as standalone or whole formulations containing additives. Current investigations include several ecological nanoparticles that are tribologically functional. We include metallic nanoparticles and their oxides, carbon allotropes, sulfides, and h-BN. The development of biomass-based lubrication technologies is an essential step toward industry sustainability. It offers the potential for economic and energy savings and is a valuable addition to present global actions against climate change and pollution.

environmental sciences,engineering, environmental,biotechnology & applied microbiology
A Review on the Science and Technology of Natural and Synthetic Biolubricants

Carlton J. Reeves,Arpith Siddaiah,Pradeep L. Menezes

DOI: https://doi.org/10.1007/s40735-016-0069-5

2017-01-03

Abstract:Bio-based lubricants have gained prominence over conventional petroleum-based oils, progressively over the last two decades as biolubricants. This trend is observed in almost every industry that has been dependent on lubricants and oils irrespective of their applications. Factors that initiated and fueled this trend vary from stringent government regulations over petroleum-based oils to the high passed depletion of oil reserves. But the most concerning factor that has fast-tracked the need for biolubricants is the toxic and harmful effect of used petroleum oils has on the environment and ecological factors. It is estimated that nearly 50% of all lubricants produced are introduced to the environment which has spurred the interest in biolubricants. This review discusses various types of eco-friendly bio-lubrications that will become a sustainable and economical alternative to the conventional petroleum-based lubricants by being sourced from renewable resources. Biolubricants are seen to be feasible and versatile lubricants with higher lubricity, lower volatility, higher shear stability, higher viscosity index, higher load-carrying capacity, and superior detergency and dispersancy when compared to petroleum-based lubricants. The review also investigates in detail the poor thermal-oxidative stability, biological deterioration, their poor solidification at low temperatures, and hydrolytic instability as well as mechanical and chemical enhancements that seek to rectify these issues. Furthermore, economical and legislative landscape of biolubricants is discussed.
Microalgae-derived biolubricants: Challenges and opportunities

Duong T Nguyen,Md Abu Hasan Johir,T M Indra Mahlia,A S Silitonga,Xiaolei Zhang,Qiang Liu,Long D Nghiem

DOI: https://doi.org/10.1016/j.scitotenv.2024.176759

2024-12-01

Abstract:Lubricants are indispensable in the modern economy for controlling friction and wear across many industries. Traditional lubricants are derived from petroleum crude and can cause significant ecological impact if released into the environment. Microalgae have emerged as a potential alternative to petroleum crude for producing renewable and environmentally friendly biolubricants. This review systematically assesses recent developments in microalgal-based biolubricant production, including tribological performance, microalgae selection, cultivation, harvesting, lipid and polysaccharide extraction and conversion to biolubricants, and market development. Compared to petroleum-based lubricants in terms of tribological properties, biolubricants are compatible with most emerging applications, such as electric vehicles and wind turbines. Nevertheless, they are less thermally and chemically stable, thus, may not be suitable for some traditional applications such as internal combustion engines. Literature data corroborated in this study reveals an urgent need for further research to scale up microalgae production and lower the cost of biomass harvesting. While technologies for converting microalgae-derived lipids to biolubricants appear to be well established, additional work is necessary to also utilize polysaccharides as another key ingredient for producing biolubricants, especially for low-temperature applications. Extraction methods are well established but further research is also needed to reduce the ecological impact, especially to utilize green solvents and reduce solvent consumption. Additionally, future research should delve into the use of nanoparticles as effective additives to obtain microalgae-based biolubricants with superior properties. Finally, it is essential to standardize the labeling system of biolubricants to establish a global market.
Advanced developments in environmentally friendly lubricants for water-based drilling fluid: a review

Xiangyang Zhao,Daqi Li,Heming Zhu,Jingyuan Ma,Yuxiu An

DOI: https://doi.org/10.1039/d2ra03888a

IF: 4.036

2022-08-16

RSC Advances

Abstract:The problem of high friction and high torque is one of the most troublesome problems for engineers in extended reach wells and long horizontal wells. Generally, the friction coefficient of oil-based drilling fluid is around 0.08, while the friction coefficient of water-based drilling fluid exceeds 0.2, which is much higher than that of oil-based drilling fluid. With the increasingly stringent environmental regulations, water-based drilling fluids have gradually become a better choice than oil-based drilling fluids. Therefore, lubricants become a key treatment agent for reducing the friction coefficient of water-based drilling fluids. Although there have been many related studies, there is a lack of comprehensive reviews on environmentally friendly water-based drilling fluid lubricants. In general, water-based drilling fluid lubricants can be mainly divided into solid lubricants, ester-based lubricants, alcohol-based lubricants, and nano-based lubricants. Vegetable oil ester-based lubricants, biodiesel lubricants, and dispersible nano-lubricants are all promising environmentally friendly water-based drilling fluid lubricants. Understanding the lubrication mechanism of different types of lubricants and clarifying the evaluation methods of lubricants is an important prerequisite for the next development in high-performance water-based drilling fluid lubricants. Therefore, the purpose of this paper is to give a comprehensive overview of water-based drilling fluid lubricants in recent years, in order to fully understand the development and lubrication mechanism of water-based drilling fluid lubricants, and provide new ideas for subsequent research on water-based drilling fluid lubricants.

chemistry, multidisciplinary
The Development of a Fully Renewable Lubricant: The Effect of Ethyl Cellulose on the Properties of a Polyhydroxyalkanoate (P34HB)-Based Grease

Shanshan Yang,Bingbing Lai,Zongzhu Liu,Wenjing Lou

DOI: https://doi.org/10.3390/su16104149

IF: 3.9

2024-05-16

Sustainability

Abstract:In the context of the ongoing evolution of the global economy and increasing environmental awareness, green sustainable development has emerged as a crucial pathway for future advancements in the lubrication industry. In this study, we prepared bio-based greases by employing a thickener system consisting of polyhydroxyalkanoate (P34HB) and ethyl cellulose, with castor oil serving as a base oil. The results indicate that ethyl cellulose significantly and effectively enhances the grease system's mechanical and colloidal stability. Notably, the addition of 5 wt% ethyl cellulose leads to superior mechanical and colloidal stability, while increasing concentrations gradually result in rheological properties similar to those of oleogels. Furthermore, the wear volume of grease containing 5 wt% ethyl cellulose was reduced by 39.20% compared to that of a reference P34HB grease, demonstrating its exceptional wear resistance. The present study provides a theoretical foundation and empirical evidence for the future development of biodegradable greases as substitutes for non-degradable materials, thereby expanding the range of environmentally friendly greases formulated with biomass-based thickeners.

environmental sciences,environmental studies,green & sustainable science & technology
Green lubrication: Mustard oil-based bio-lubricant enhanced with waste eggshell-derived CaO nanoparticles for sustainable and eco-friendly industrial solutions

Amina Hamnas,G. Unnikrishnan

DOI: https://doi.org/10.1016/j.jclepro.2024.142184

IF: 11.1

2024-04-23

Journal of Cleaner Production

Abstract:The adoption of bio-lubricants derived from vegetable oils is pivotal in advancing environmental sustainability and mitigating the ecological impact of industrial machinery. This study introduces a groundbreaking bio-lubricant formulated with mustard oil as the base, augmented by CaO nanoparticles synthesized from waste eggshells. The CaO nanoparticles were synthesized through a sol-gel method and meticulously characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). This investigation delves into the tribological, rheological, and thermal properties of the developed bio-lubricant, highlighting its potential as a sustainable alternative. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were employed to evaluate thermal stability and cold flow properties, revealing promising results. A comparative study with commercially available engine oil (SAE20W40) underscores the superior performance of the bio-lubricant. The key innovation lies in the incorporation of CaO nanoparticles, facilitated by a surfactant, which substantially enhances wear and friction reduction, lubrication qualities, shear stability, viscosity-temperature behavior, and thermal stability. These advancements position our bio-lubricant as a high-performance, environmentally friendly substitute for conventional lubricants. The study's findings underscore its potential for widespread industrial adoption, promising a transformative shift towards sustainable and eco-conscious lubrication practices.

environmental sciences,green & sustainable science & technology,engineering, environmental
Development in Lubricant Antiwear Mechanism and Boundary Film Model

Zhang Xiaoying,Gan Lihua,Xu Zijie,Chen Longwu

DOI: https://doi.org/10.3969/j.issn.0254-0150.2006.01.050

2006-01-01

Abstract:Antiwear mechanism for several lubricant additives and research methods for boundary film of frictional pair were summarized.Several kinds of boundary lubricated models at present were introduced and reviewed.
Investigations on Ways to Improve the Scuffing and Wear Behavior of Oil-Free Water-Based Lubricants for Gear Applications

Yves Johannes Barth,Nadine Sagraloff,Gregor Egger,Thomas Tobie,Karsten Stahl

DOI: https://doi.org/10.1115/1.4064401

2024-01-22

Journal of Tribology

Abstract:Abstract Today, mineral or synthetic oils that are made out of fossil raw materials are the most common lubricants in gear drive applications. Most of them are nonbiodegradable and may pose a risk to the environment. An important step to minimize the risk and the ecological footprint is the use of biodegradable and eco-friendly lubricants. Former research shows the potential of water-based lubricants in gear applications. Therefore, an oil-free, water-based lubricant was developed for this study. The base lubricant contains plant-based thickeners to generate an appropriate viscosity for a sufficient lubricant film thickness in the tooth contact. In experimental investigations, the sliding wear and scuffing performance has been examined under variation of the added polymers and additives. The scuffing tests A/8.3/RT are performed according to DIN ISO 14635-1. The wear test procedure is based on DGMK 377-01. In both scuffing tests with the sample, the failure load stage = 8 was achieved. For case-carburized gears, a “medium” to “high” amount of wear can be detected. Additional tests with nitrided gears show a “low” amount of wear. This article aims to show the great potential of water-based oils for gear lubrication and suggests operating conditions for maximum wear and scuffing carrying capacity.

engineering, mechanical
Application Research of Biodegradable Base Oil in the Green Metal Cutting Fluid

Wang Lin,Wang Dazhi,Han Sheng

DOI: https://doi.org/10.4028/www.scientific.net/amr.641-642.619

2013-01-01

Advanced Materials Research

Abstract:This paper mainly enumerated several kinds of base oil which all have a good biodegradation, such as vegetable oil, synthetic ester, poly-alpha-olefin, polyethylene glycol, introduced their performances, functions, the research status and the application prospect in the cutting fluid and brings forward the direction of the metal cutting fluid's development.
Progress in Application Nanoparticles in Lubricating Materials

FANG Fen,YAN Hong-xia,ZHANG Jun-ping

DOI: https://doi.org/10.3969/j.issn.1001-1560.2006.12.011

2006-01-01

Abstract:A review was given on the progress in application of nanoparticles in lubricating materials. Thus the methods to prepare lubricative nanoparticles were introduced. The action mechanisms of the nanoparticles were discussed with respect to transfer film formation, ball bearing-like function, and surface optimization function. The application of the lubricative nanoparticles in lubricating materials was high-lighted. It was pointed out that many kinds of inorganic lubrica-tive nanoparticles could be used as antiwear and friction - reducing additives to improve the tribological behavior of lubricating oils and polymer - matrix composites. At the same time, some lubrica-tive nanoparticles could be used as fillers in non-polymer-matrix composite coatings and endow the coatings with the ability to well adapt to varied environmental conditions, which would make it feasible for the filled composite coatings to find promising application in engineering.
Preparation and Performance Evaluation of an Environmentally Friendly Lubricant for Water-based Drilling fluid

Kai Shan,Zhengsong Qiu,Wei Zhang,Hanyi Zhong,Xin Zhao,Mingli Di,Jian Mo

DOI: https://doi.org/10.1088/1755-1315/787/1/012008

2021-06-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract With the increasing difficulty of exploration and development of oil and gas resources, the problems of high friction torque in long horizontal well section and high temperature in deep well are increasingly prominent, which put forward higher technical requirements for the lubricity, temperature resistance and environmental protection of drilling fluid lubricant. Traditional drilling fluid lubricants are difficult to meet the above technical requirements. Based on the optimization of modified vegetable oil, extreme pressure agent, surfactant, antioxidant and preparation conditions, an environmentally friendly drilling fluid lubricant SDGL-2 was developed. The evaluation results show that the lubricant SDGL-2 has fluorescence grade of 1~2, temperature resistance of 160 °C, good biodegradability and no toxicity. Its lubricity is better than that of common drilling fluid lubricants, and it is compatible with several common drilling fluids.
Research Progress and Development Trend on Environmental-friendly Lubricant in Water-based Drilling Fluid

Yang XUAN,Xiaolin QIAN,Yongxue LIN,Zhifa WANG,Jiang XU

DOI: https://doi.org/10.19346/j.cnki.1000-4092.2017.04.030

2017-01-01

Abstract:In order to reduce the drag and torque of deep horizontal well,large amount of crude oil was added in the water-based drilling fluid. However,crude oil not only bring harm to fluorescent logging,but also cause serious environmental pollution. Therefore,it is important to develop novel environmental-friendly lubricant that can take the place of crude oil. In this review,the research progress of lubricant in water-based drilling fluid in recent years was elaborated,and the development of water-based drilling fluid lubricants was prospected through comparing the advantages and disadvantages of different kinds of lubricants.
A Review of Green Technology in Mechanical Industry

陈士玮,李柱国,周守西

DOI: https://doi.org/10.3321/j.issn:1003-8728.2003.z1.026

2003-01-01

Abstract:This paper discusses the concept, significance and main contents of green technology in mechanical industry, and points out that green technology is the direction of mechanical industry, and is necessary for sustainable development. But green technology is still at its forming and developing stage, and there are many difficulties and questions in its practice and popularization. So, this paper appeals to a few departments and enterprises not to pursue economic benefit only or have short-sight, but to take effective measures and play a role in green revolution.
Sustainable Development of Cutting Fluids:The Comprehensive Review of Vegetable Oil

Xiangcheng Luo,Shujing Wu,Dazhong Wang,Yixin Yun,Qinglong An,Changhe Li

DOI: https://doi.org/10.1016/j.jclepro.2024.143544

IF: 11.1

2024-01-01

Journal of Cleaner Production

Abstract:In the field of mechanical machining, cutting fluids are indispensable, widely utilized in both rough machining and high-precision operations, particularly in industries such as aerospace. As mechanical component complexity and precision requirements increase, the lubrication performance of cutting fluids must also be improved. Currently, oil-based cutting fluids, especially mineral oil-based cutting fluids (MOCF), are widely applied and well-developed because of their excellent lubrication properties. However, due to increasing environmental concerns and the drive for sustainable development, vegetable oils (VO) have emerged as viable alternatives to mineral oils (MO) in cutting fluid applications. Researchers have demonstrated that chemical modification of vegetable oils can significantly enhance the lubrication performance of vegetable oil-based cutting fluids (VOCF), thereby addressing the inherent shortcomings of VO in machining processes. For example, chemical modification of vegetable oils can reduce surface roughness by 14% to 17% compared to MO, and it can lower cutting temperatures by over 10%, resulting in a 10% to 20% reduction in tool wear. Additionally, when VOCF are combined with minimal quantity lubrication (MQL) technology, surface roughness can be reduced by 20% to 60% compared to dry and flood machining. This article provides a comprehensive review of the advantages and disadvantages of VOCFs compared to MOCF, with a particular emphasis on friction performance. It also summarizes chemical modification techniques, mechanical properties of VO, and proposes methods for transitioning from MO to VO. Furthermore, the review discusses the enhancement of VO lubrication performance through the incorporation of nanoparticles, highlighting the advantages of vegetable oil-based nano lubrication technology as a green processing method. This review provides the latest insights into the sustainable development of cutting fluids.
Progress in Experimental Study of Aqueous Lubrication

LiRan Ma,ChenHui Zhang,ShuHai Liu

DOI: https://doi.org/10.1007/s11434-012-5031-4

2012-01-01

Abstract:Aqueous lubrication is commonly regarded as friendly to the environment. We review current knowledge of the behaviors and mechanisms of aqueous lubrication. Major methods for investigating aqueous lubrication are addressed. We describe studies on both friction and film formation performance of various water-based lubricants. Additionally, we discuss possible underlying mechanisms of aqueous lubrication. Attention is also drawn to continuing topics of investigation and some unsolved problems.

Development Brief Review of Green Lubricants

Green Chemical Engineering in China

RESEARCH AND APPLICATION OF ENVIRONMENTALLY FRIENDLY LUBRICANT

Development and Utilization of the Environmental Benign Lubricant

Development of Environmental friendly lubricants

An Experimental Study of Antirust Additives Ratio for Green Water-Based Lubricant

A review on the menagerie of green fluids and nanoparticles to develop sustainable biolubricant technologies.

A Review on the Science and Technology of Natural and Synthetic Biolubricants

Microalgae-derived biolubricants: Challenges and opportunities

Advanced developments in environmentally friendly lubricants for water-based drilling fluid: a review

The Development of a Fully Renewable Lubricant: The Effect of Ethyl Cellulose on the Properties of a Polyhydroxyalkanoate (P34HB)-Based Grease

Green lubrication: Mustard oil-based bio-lubricant enhanced with waste eggshell-derived CaO nanoparticles for sustainable and eco-friendly industrial solutions

Development in Lubricant Antiwear Mechanism and Boundary Film Model

Investigations on Ways to Improve the Scuffing and Wear Behavior of Oil-Free Water-Based Lubricants for Gear Applications

Application Research of Biodegradable Base Oil in the Green Metal Cutting Fluid

Progress in Application Nanoparticles in Lubricating Materials

Preparation and Performance Evaluation of an Environmentally Friendly Lubricant for Water-based Drilling fluid

Research Progress and Development Trend on Environmental-friendly Lubricant in Water-based Drilling Fluid

A Review of Green Technology in Mechanical Industry

Sustainable Development of Cutting Fluids:The Comprehensive Review of Vegetable Oil

Progress in Experimental Study of Aqueous Lubrication