Abstract:Abstract Vegetable oils are a highly promising alternative to produce various lubricants, owing to their biodegradability and eco-friendliness. In comparison to mineral oil, these oils possess a higher flash point and viscosity index, along with superior lubricating properties. Additionally, most of the vegetable oils are easily accessible in local markets in India. However, their industrial application is limited by poor thermal and oxidative stability, which can be addressed through chemical modification, the addition of appropriate additives, or by blending these oils. Greases, characterized by their semi-solid consistency, are widely used lubricants. Most of the grease production is based on mineral oils as base oil and lithium soap as a thickener. These materials are not only non-biodegradable but also scarce and have health implications. Consequently, biodegradable grease represents an eco-friendly and healthy alternative. Grease made using vegetable oils with the required properties has the potential to bring about revolutionary changes. The present work focuses on the feasibility of using chemically modified blended rice bran oil (RBO) and Calophyllum inophyllum oil (CIO) as a bio-lubricant. The oils undergo a two-step modification process, involving a transesterification reaction followed by epoxidation. Significant improvements have been observed in the chemical properties (acid, peroxide, and iodine values) of transesterified epoxidized rice bran oil Calophyllum inophyllum oil mixture–50:50 (ETRCIO) when compared with Unmodified Rice bran oil Calophyllum inophyllum oil mixture–50:50 (RCIO). The acid value, peroxide value, and iodine value improved by 91.66%, 87.08%, and 15.78% respectively. The rheological, tribological, and chemical properties of the blended samples have been evaluated and compared to pure oils using American Society for Testing and Materials (ASTM) and Indian Standards (IS). Additionally, ETRCIO was used to develop a bio-grease, and its tribological properties were extensively analyzed. The mean coefficient of friction (COF) and wear scar diameter (WSD) of the ETRCIO grease sample improved by 10.20% and 29.32% respectively when compared with that of commercially available grease. These findings indicate that the ETRCIO bio-grease exhibits superior tribological properties in comparison to commercially available grease.

Green lubrication: Mustard oil-based bio-lubricant enhanced with waste eggshell-derived CaO nanoparticles for sustainable and eco-friendly industrial solutions

Sustainable bio-lubricant blends from mustard oil and castor oil: physico-chemical, thermal, rheological, and tribological characterizations for eco-friendly alternatives to commercial engine oil

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

Achieving the Good Thermal-Stability and Lubricity Via a Dihydroxy Biolubricant from the Agro-Waste of Codonopsis Pilosula

Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis

Characterization of bio-lubricants with nanoparticles additives

Formulation and evaluation of bio-grease from the blend of chemically modified rice bran oil and Calophyllum inophyllum oil

Microalgae-derived biolubricants: Challenges and opportunities

Tribological evaluation of date seed oil and castor oil blends with halloysite nanotube additives as environment friendly bio-lubricants

A review on the menagerie of green fluids and nanoparticles to develop sustainable biolubricant technologies.

Development of Vegetable Oil-Based Greases for Extreme Pressure Applications: An Integration of Non-toxic, Eco-Friendly Ingredients for Enhanced Performance

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Tribological Properties and Biotoxicity of Gluconate-Based Ionic Liquids as Glycerol Lubricant Additives

Friction and wear characteristics of vegetable oils using nanoparticles for sustainable lubrication

The Development of a Fully Renewable Lubricant: The Effect of Ethyl Cellulose on the Properties of a Polyhydroxyalkanoate (P34HB)-Based Grease

Enhancing Lubrication Performance of Plastic Oil Lubricant with Oleic Acid-Functionalized Graphene Nanoplatelets and Hexagonal Boron Nitride Solid Lubricant Additives

A Review on the Science and Technology of Natural and Synthetic Biolubricants

A Comparative Analysis of the Lubricating Performance of an Eco-Friendly Lubricant vs Mineral Oil in a Metallic System

Influence of techniques on synthesizing cashew nut shell oil as a prospective biolubricant on its physicochemical, tribological, and thermal behaviors

Formulation and characterization of eco-friendly Mahua and Linseed oil-based nanolubricants by incorporating h-BN nano-additives

Modification and synthesis of low pour point plant-based lubricants with ionic liquid catalysis