Abstract:It is well known that lubricating oils reduce the friction coefficient between two surfaces in contact. Since petroleum lubricants are toxic and have a low biodegradability, they are typically not appropriate for the environment. As a result, as public worries about a pollution-free environment grow, so does the demand for lubricants that are acceptable to the environment. The primary rationale for utilizing vegetable oils in forthcoming bio-lubricant formulations is their high lubricating performance, low toxicity, sustainable, and biodegradability. Plant oils hold great potential as a foundational fluid for bio-lubricants, since their synthetic and vegetable oil-based esters provide the most environmentally friendly option for creating lubricants. In this study, Jatropha and Jojoba raw oil were chemically modified via epoxidation followed by transesterification to produce bio-lubricants. Thus, the aim of this work is to develop a bio-lubricant from jatropha and jojoba methyl ester, further adding nanoparticles multiwalled nanotubes and titanium dioxide for improvement of tribological properties. The chemical modification of the jatropha and jojoba oil results in a decrease in iodine value, resulting in the breaking of carbon bonds. Viscosity tests were performed using the Anton Par MCR 92 Rheometer, with temperature ranging from 30°C to 80°C. Thermal stability measurements of bio-lubricants were performed using PerkinElmer's Thermogravimetric analyzer − 4000 instrument and thermal degradation temperature for Epoxidized Jatropha – sulfuric acid, Epoxidized Jatropha – hydrochloric acid, Epoxidized Jojoba – sulfuric acid and Epoxidized Jojoba – Hydrochloric acid samples are 238°C, 224°C, 230°C, and 244°C, respectively. The 94.68% and 79.85% reduction in wear was obtained for Epoxidized Jojoba with hydrochloric acid, titanium dioxide and epoxidized Jatropha with sulfuric acid, multiwalled carbon nanotubes in comparison with their epoxidized samples. The coefficient of friction of Epoxidized Jatropha with sulfuric acid, multiwalled carbon nanotubes and Epoxidized Jojoba with Hydrochloric acid, Titanium dioxide sample was found to be 0.061 and 0.059, respectively.

Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

Silsesquioxanes-Based Nanolubricant Additives with High Thermal Stability, Superhydrophobicity, and Self-cleaning Properties

Characterization of bio-lubricants with nanoparticles additives

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Tribological Analysis of a Hydrodynamic Journal Bearing under the Influence of Synthetic and Biolubricants

Tribological performance of fatty acid, acid/amine additive mixture and ionic liquid

The Role of Functionalized CuO Additive in Enhancing Tribological Performance of Plastic Oil Lubricant

Improving physicochemical and tribological characteristics of bio-lubricants using carbon-based hybrid nanomaterials modified by tertiary-butyl-hydroquinone

A Review on the Effect of Metal Oxide Nanoparticles on Tribological Properties of Biolubricants

Green lubrication: Mustard oil-based bio-lubricant enhanced with waste eggshell-derived CaO nanoparticles for sustainable and eco-friendly industrial solutions

Tribological Performance of a Paraffinic Base Oil Additive with Coated and Uncoated SiO2 Nanoparticles

Enhanced tribological performance of transesterified corn oil biodiesel blends with CuO and TiO 2 nanoparticles: experimental analysis on wear and friction reduction using environment friendly lubricants

Synergism between bio-based oleate ester and low-concentration ZDDP under reciprocating contacts

Enhancing Lubrication Performance of Plastic Oil Lubricant with Oleic Acid-Functionalized Graphene Nanoplatelets and Hexagonal Boron Nitride Solid Lubricant Additives

Towards outstanding lubricity performance of proton-type ionic liquids or synergistic effects with friction modifiers used as oil additives at the steel/steel interface

Effect of copper oxide@boron nitride nanosheet hybrid nanocomposite on tribological properties of paraffin liquid

Tribological evaluation of date seed oil and castor oil blends with halloysite nanotube additives as environment friendly bio-lubricants

Simultaneous low friction and ultra-low wear enabled by a 2,5-Furandicarboxylic acid derived bio-based ionic liquid

Sustainable bio-lubricant blends from mustard oil and castor oil: physico-chemical, thermal, rheological, and tribological characterizations for eco-friendly alternatives to commercial engine oil

Design of experiments coupled with Bayesian optimisation for nanolubricant formulation