Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. Lubrication has remained an important aspect of machines maintenance and designs since time immemorial, yet the quest for improved lubricant for sustainable life of both equipment and environment continues to intensify. Many lubricants that is, research for a lubricant that is capable of providing maintenance of sustainable equipment without compromise to the environment is on the rise have been formulated and a lot of discoveries have been found in approaches toward enhanced and sustainable lubricants performance. Addition of foreign materials in nano quantity to fortify base oil properties for special purposes has also received greater attention in recent years. While this approach has yielded amazing results, concerns bordering on non-biodegradability of the mineral oils and safety of their additives to the environment equally continue to grow. This has escalated research interest in vegetable oils and their derivatives such as palm oil and other seed oils as a substitute toward limiting the consequences of improper disposal and eventual natural habitat degradation. A new approach to this quest is the adoption of palm oil (in Super Olein IV64 grade) with 150–450particles per million of tert-Butylhydroquinone for comparison with tribological behavior of mineral oil (Shell Helix SAE40W10) within the temperatures of 40°C to 100°C using linear reciprocating tribometer Winducom ASTM G133 test rig. The results showed tremendous similarity in coefficient of friction values between 0.1 and 0.12 of Super Olein with 150 particles per million and 300 particles per million of tert-Butylhydroquinone correlating closely with that of Shell Helix SAE40W10 at 80°C and 100°C, respectively. Wear track on the 20mm square plate was observed on the low-resolution microscope while wear scar diameter of the 6 mm SKD11 ball was observed on the high-resolution microscope. The results obtained at a temperature of 100°C in Super Olein IV64 + 150 particles per million tert-Butylhydroquinone and Super Olein IV64 + 300 particles per million tert-Butylhydroquinone is very similar to that of SAE40W10 except for Super Olein IV64 + 450 particles per million TBHQ whose coefficient of friction maintained a higher value of 0.3 at those temperatures.

Improving physicochemical and tribological characteristics of bio-lubricants using carbon-based hybrid nanomaterials modified by tertiary-butyl-hydroquinone

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

Silsesquioxanes-Based Nanolubricant Additives with High Thermal Stability, Superhydrophobicity, and Self-cleaning Properties

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Experimental and molecular dynamics simulation study of the thermal conductivity mechanism of biolubricant-based functionalized silver/carbon black additives

Tribological Analysis of a Hydrodynamic Journal Bearing under the Influence of Synthetic and Biolubricants

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Optimization of the Rheological Properties and Tribological Performance of SAE 5w-30 Base Oil with Added MWCNTs

Tribological evaluation of date seed oil and castor oil blends with halloysite nanotube additives as environment friendly bio-lubricants

Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis

Characterization of bio-lubricants with nanoparticles additives

Potential of palm oil with tert-Butylhydroquinone in place of mineral oil lubricant for reducing environmental degradation

Tribological Properties of CNT microspheres as a Lubricant Additive

Cellulose-armored “CNTs-soft metal” hybrid nanomaterials to improving the friction-reduction and anti-wear performance of bio-lubricants

Enhanced tribological performances of zinc oxide/MWCNTs hybrid nanomaterials as the effective lubricant additive in engine oil

Experimental Investigation on the Tribological and Rheological Properties of Graphene and FMWCNT Based Nanolubricants with CTAB Surfactants

Nano-Magnesium Silicate Hydroxide/Crumpled Graphene Balls Composites, a Novel Kind of Lubricating Additive with High Performance for Friction and Wear Reduction

Effect of Boundary Layer Modification and Enhanced Thermal Characteristics on Tribological Performance of Alumina Nanofluids Dispersed in Lubricant Oil

Synthesis, characterization and tribological performances of nano-CeO 2 /biodiesel carbon soot composites as a novel lubricant additive in polyalphaolefin

Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process

Effect of 2D Cu-MOFs modified carbon spheres nanoparticles as an environmentally friendly lubricating additive on tribological properties