Abstract:Tensile properties and fracture mechanisms of SiCf/TC17 composites at room temperature and 773 K were studied. The results show that fiber elastic deformation and matrix yielding contributed to the shapes of the stress-strain curves of SiCf/TC17 composites, which were the bilinear appearance at 298 K and the slight curvature at 773 K. Major fracture mechanism of SiCf/TC17 composites at room temperature were as follows: multiple fractures of the interfacial reaction layer, single fiber fracture, matrix brittle fracture etc.. Typical fracture mechanism of SiCf/TC17 composites at elevated temperature were as follows: multiple fiber fracture, matrix plastic fracture, interface debonding etc.. Fiber cumulating damage theory was proved to be suitable for estimation of the fracture strength of this composite. The calculations of local loading sharing model while taking three or more fibers failure into account and global loading sharing model were close to the experimental values of room temperature and elevated temperature respectively. In addition, according to fracture mechanisms and strength prediction, tensile fracture process of SiCf/TC17 composites at room and elevated temperature were explained in detail. At room temperature, multiple fractures of the interfacial reaction layer started at first, and then the weak fiber fractured gradually and randomly. After critical fiber cluster has been formed by nearby broken fibers, the crack extended into the matrix from these fibers. With the increase of load, the fibers and the matrix at the tip of crack gradually destroyed. At the same time, the cracks from other critical fiber clusters were also expanding and connecting to each other. When the crack area has reached the critical level, the remaining fiber and matrix quickly fractured. However, at elevated temperature the matrix yielded firstly, and then multiple fracture randomly of the interfacial reaction layer and the weak fiber occurred sequentially. The crack from broken fiber deflected at interface between fiber and matrix, caused interface debonding. With the increasing of broken fiber number, the micro-cavities of matrix emerged gradually in the stress concentration area. When the total crack area accumulated by the broken fibers and micro-cavities of matrix has reached the critical level, the remaining fiber and matrix quickly fractured.

An Experimental Study on the in Situ Strength of Sic Fibre in Unidirectional Sic/Al Composites

Effects of Heat-Treatment and Strain Rate on the Mechanical Properties of SiC/Al Composite Wires—experimental and Constitutive Modeling

In situ strength distribution of carbon fibers in unidirectional metal-matrix composites-wires

Effect of Strain Rate on the Mechanical Behaviors of SiC Fiber

Experimental Study Of The Rate-Sensitivity Of Sicp/Al Composites And The Establishment Of A Dynamic Constitutive Equation

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

In-situ Tensile Damage and Fracture Behavior of PIP SiC/SiC Minicomposites at Room Temperature

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

High-temperature tensile behavior of 3D SiC/SiC composites

Study of SiC fiber axial compressive behavior using tensile recoil measurement

Study on Tensile Behavior of Sicf/Tc17 Composites

Comparison of prior exposure tensile damage and fracture of two-dimensional C/SiC and SiC/SiC fiber-reinforced ceramic-matrix composites

A Modified Iosipescu Method to Study In-Plane Shear Strength of C/SiC Composites at Elevated Temperatures in Air

The Effect of Heat Treatment on the Properties of SiCf/SiC Composites Prepared with Different SiC Fibers

A Study of the Residual Stress and Its Influence on Tensile Behaviors of Fiber-Reinforced Sic/Al Composite

Effect of strain rate on the tensile properties of mini-SiC/SiC composites

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates

Effect of Strain Rate on Tensile Behavior of SiCp/AI MMC

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers

On the Tensile Behaviors of 2D Twill Woven SiO2f/SiO2 Composites at Ambient and Elevated Temperatures: Mesoscale Analysis and in Situ Experimental Investigation