Abstract:The central deformation extent of the thick plate can be improved and the approaching uniform deformation will be realized by the snake/gradient temperature rolling (SGTR). At present, the existing rolling force analytical models cannot be directly used for SGTR because of the great difference with the synchronous rolling. The rolling force model should be established so as to meet the production demand of the SGTR with different roll diameters. The thick plate is divided into three layers according to the numerical results of the short-term ultra-fast cooling for the thick plate. The deformation region is simplified into different zones and layers according to the temperature gradient and neutral point position. The traditional von Mises yield criterion was optimized by the introduced coefficients c1 and c2 according to the slip line field theory to correct the deviation caused by the uniform and shear stress assumption. The specific pressure equation is established by the slab method. The deformation region with different composition cases is analyzed, and the rolling force and torque analytical models are established according to the boundary conditions on this basis. The short-term ultra-fast cooling and rolling process were simulated by ANSYS software. The deformation resistance gradient produced by short-term ultra-fast cooling and roll diameter ratio are the main factors to affect the rolling force, while the roll offset has little effect on the rolling force because of its small proportion in the deformation region. The position of neutral points not only affects the rolling torque, but also changes its direction in certain conditions. The model precision was analyzed, and the rolling force calculated by the established analytic model is in good agreement with the numerical method, which serves as a theoretical basis for the rolling mill design and process parameter setting.

The tail deviation of the aluminum strip hot rolling control model and its simulation

The central strain analytical modeling and analysis for the plate rolling process

Elongation Control of the Ultra-Thin Tinplate During Two-Stand Temper Rolling Unsteady Process

Finite Element Analysis of Temper Rolling Process

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

Simulation of the rolling process of 4-high hot steel strip continuous mills

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

NONLINEAR THREE-DIMENSIONAL SIMULATION FOR HOT CONTINUOUS ROLLING OF STRIP STEEL

Modeling and Simulation of the Strip Tension in Bridle Roll of the Continuous Annealing Line

Numerical simulation of cold longitudinal asymmetric rolling process

Prediction and analysis of rolling process temperature field for silicon steel in tandem cold rolling

Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips

A Novel Modeling Method in Metal Strip Leveling Based on a Roll-Strip Unit

Design of intermediate roll contour and analysis of regulation ability on strip shape of 18-High mill

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Mathematical modeling and analysis of the tailor rolled blank manufacturing process

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

ASR Bending Force Mathematical Model for the Same Width Strip Rolling Campaigns in Hot Rolling

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills