Abstract:Purpose This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device. Design/methodology/approach 2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope. Findings The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the "rainbow ring" cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 μm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity. Originality/value Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

Experimental Study of Cavitation Erosion Damage Affected by Microparticles

Study On Effect Of Microparticle'S Size On Cavitation Erosion In Solid-Liquid System

Experimental Study and Analysis on Incipient Stage of Cavitation Erosion

Effect of Microparticle Properties on Erosion in Solid-Steam Mixtures

Effect of micro-particles on cavitation erosion behavior of 2Cr3WMoV steel

Cavitation Damages on Solid Surfaces in Suspensions Containing Spherical and Irregular Microparticles

Experimental and numerical investigations on development of cavitation erosion pits on solid surface

Experimental study on the mesoscale causes of the effect of sediment size and concentration on material cavitation erosion in sandy water

On Mechanism of Cavitation Erosion of Rough Surface

Enhancement of cavitation intensity and erosion ability of submerged cavitation jet by adding micro-particles

Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery

Key Roles of Micro-Particles in Water on Occurrence of Cavitation-Erosion of Hydro-Machinery

A Study on Surface Topography in Cavitation Erosion Tests of AlSi10Mg

Erosion and abrasion on mild carbon steel surface by steam containing SiC microparticles

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Effect of Micro-Particles on Cavitation Erosion of Ti6Al4V Alloy in Sulfuric Acid Solution.

Dual role of microparticles in synergistic cavitation–particle erosion: Modeling and experiments

Investigation of Erosion Damages Induced by Wet Steam Containing Micro-Particles

Effect of Processing Methods and Type of Materials on Cavitation Erosion

Inhibition of the Ultrasonic Microjet-Pits on the Carbon Steel in the Particles-Water Mixtures

Damages on Steel Surface at the Incubation Stage of the Vibration Cavitation Erosion in Water