Abstract:Purpose This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device. Design/methodology/approach 2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope. Findings The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the "rainbow ring" cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 μm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity. Originality/value Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

Inhibition of the Ultrasonic Microjet-Pits on the Carbon Steel in the Particles-Water Mixtures

Effect of micro-particles on cavitation erosion behavior of 2Cr3WMoV steel

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

On Mechanism of Cavitation Erosion of Rough Surface

Damages on Steel Surface at the Incubation Stage of the Vibration Cavitation Erosion in Water

Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery

The generation of nano sandwich sheets in ring area around cavitation erosion pit on the surface of carbon steel

Key Roles of Micro-Particles in Water on Occurrence of Cavitation-Erosion of Hydro-Machinery

Experimental Study and Analysis on Incipient Stage of Cavitation Erosion

Effect of Hydrodynamic Pressures Near Solid Surfaces in the Incubation Stage of Cavitation Erosion

Enhancement of cavitation intensity and erosion ability of submerged cavitation jet by adding micro-particles

Water Erosion Mechanism of Mild Carbon Steels Induced by Micro-Particles

Experimental Study of Cavitation Erosion Damage Affected by Microparticles

Effect of Micro-Particles on Cavitation Erosion of Ti6Al4V Alloy in Sulfuric Acid Solution.

Effect of Surface Material on the Cavitation Erosion Noise: Experimental Investigation

Study On Effect Of Microparticle'S Size On Cavitation Erosion In Solid-Liquid System

Affected Zone Generated Around the Erosion Pit on Carbon Steel Surface at the Incipient Stage of Vibration Cavitation

Experimental and numerical investigations on development of cavitation erosion pits on solid surface

Thermal Effect at the Incipient Stage of Cavitation Erosion on A Stainless Steel in Ultrasonic Vibration Cavitation

Experimental Study on the Surface Property Changes of Aluminum Alloy and Stainless Steel after Impingement with Submerged Cavitation Jet

Erosion and abrasion on mild carbon steel surface by steam containing SiC microparticles