Abstract:Purpose This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device. Design/methodology/approach 2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope. Findings The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the "rainbow ring" cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 μm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity. Originality/value Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

Cavitation Damages on Solid Surfaces in Suspensions Containing Spherical and Irregular Microparticles

Experimental Study of Cavitation Erosion Damage Affected by Microparticles

Study On Effect Of Microparticle'S Size On Cavitation Erosion In Solid-Liquid System

Experimental Study and Analysis on Incipient Stage of Cavitation Erosion

Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery

Experimental study on the mesoscale causes of the effect of sediment size and concentration on material cavitation erosion in sandy water

An Experimental Study on the Cavitation of Water with Effects of SiO2 Nanoparticles

On Mechanism of Cavitation Erosion of Rough Surface

Key Factors to Induce Cavitation-Erosion

Controlled Cavitation at Nano/Microparticle Surfaces

Key Roles of Micro-Particles in Water on Occurrence of Cavitation-Erosion of Hydro-Machinery

Effect of Surface Material on the Cavitation Erosion Noise: Experimental Investigation

Cavitation Inception of Water with Solid Nanoparticles: A Molecular Dynamics Study

Effect of micro-particles on cavitation erosion behavior of 2Cr3WMoV steel

Damages on Steel Surface at the Incubation Stage of the Vibration Cavitation Erosion in Water

Experimental study on the interaction of a cavitation bubble flanked by two particles

Spherical dendritic particles formed in cavitation erosion

Cavitation inception by almost spherical solid particles in water

Inelastic Damages by Stress Wave on Steel Surface at the Incubation Stage of Vibration Cavitation Erosion

The Characteristics of Unsteady Cavitation Around a Sphere

Experimental Study of Cavitation Damage on Hydrogen-Terminated and Oxygen-Terminated Diamond Film Surfaces