Abstract:ZrB2-20 vol.% SiC-10 vol.% h-BN (particles) ceramic composites (ZSB) were fabricated by hot pressing under inert gas protected. ZSB samples with mean size 75 × 55 × 40 mm(3) were heated using current heating method and then cooled down to low temperature by circulating water. ZSB samples repeatedly went through thermal shock with 10-50 times under various conditions, respectively. Diverse effects on residual strength of ZSB at different experiment conditions (temperatures, thermal shock times, and heating rates) were investigated. The test results indicated that the residual strength of specimen materials all reached the maximum while the temperature was 1600 °C and thermal shock number was less than 50 times. Because ZSB samples could not stand the extremely serious hyperoxidation at very high temperature (1800 °C), the residual strength of samples decreased sharply. At 1600 °C, when the thermal shock times was 20, ZSB samples' residual strength reached the maximum, but it decreased to the lowest point while the thermal shock times was 30. So we argued that the sensitive thermal shock number was 30. Finally, we analyzed the influences on samples residual strength generated by different heating rates at the same temperature and thermal shock number; the results showed that when heating rate was equal to cooling rate, the residual strength of specimen materials reached the maximum.

The Thermal Shock Resistance Of Zrb2-Sic Ultra-High Temperature Ceramics

Thermal Shock Property of ZrB_2-Based Ultra-High Temperature Ceramics

Repeated Thermal Shock Behavior of the ZrB2–SiC–ZrC Ultrahigh-Temperature Ceramic

Thermal shock behavior of ZrB2–SiC ultra-high temperature ceramics with addition of zirconia

Effect of repeated thermal shock on mechanical properties of ZrB2-SiC-BN ceramic composites

Thermal shock behavior of SiC-whisker-reinforced diboride ultrahigh-temperature ceramics

Thermal Shock Behavior of Zrb2-Sic Ceramics with Different Quenching Media

Thermal Shock Behavior of Porous ZrB2–SiC Ceramics

Cyclic Thermal Shock Behaviours of ZrB2-SiC Ultra-High Temperature Ceramics Joints Bonded with Ni Interlayer

Study on the ZrB2-SiCw Ultrahigh Temperature Ceramics

The repeated thermal shock behaviors of a ZrB2–SiC composite heated by electric resistance method

Single-cycle thermal shock resistance of ZrB2–SiCnp ceramic composites

Microstructure and Thermal Shock Resistance of Zr7/8Ti1/8B2-20 Vol% SiC Composites Synthesized by Mechanical Alloying and Spark Plasma Sintering

Mechanism Analysis of Thermal Shock Properties for Zrb2-20%Sicp-10%Aln Ultra-High Temperature Ceramic with the Surface Defects

Cyclic Thermal Shock Behaviors of ZrB2-SiC Laminated Ceramics Sintered with Different-Sized Particles for Each Sublayer

Thermal shock characterization of large size ZrB2 ceramic matrix composite material

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Mechanical Properties and Thermal Shock Resistance of ZrB2–SiC Ceramic Toughened with Graphite Flake and SiC Whiskers

Evaluations of cooling rate and initial temperature on thermal shock behavior of ZrB 2 -SiC ceramic

Microstructure, Mechanical Properties and Thermal Shock Resistance of Zirconium Diboride Containing Silicon Carbide Ceramic Toughened by Carbon Black

Ultrahigh‐temperature tensile behaviors of ZrB2–SiC ceramics