Abstract:The work aims to study effects of sliding speed, normal load and heating temperature on friction and wear properties of Ni-P/Ti/DLC multilayer films. Ni-P layer was plated on die steel substrates by adopting electroless nickel-phosphate plating process, and Ti transition layer and DLC protective layer were deposited by adopting filtered cathodic vacuum arc tech·60· 表面技术 2018 年 7 月 nology individually. Friction and wear properties of the multilayer films were evaluated in friction and wear experiments. Hardness, elastic modulus and composition of the multilayer films at different heating temperature were characterized based upon nanoindentation test and Raman spectrum detection. Wear track morphology and cross-sectional profile of the multilayer films were also analyzed with scanning electron microscope (SEM) and surface profile instrument. As the sliding speed increased, friction coefficient of the multilayer films decreased, and wear rate and volume first reduced and then increased. Friction coefficient of multilayer films changed slightly at different normal loads, and wear rate and volume increased as normal load increased. As the heating temperature increased, the friction coefficient of multilayer films decreased, and wear rate and volume first increased and then decreased. In addition, at higher heating temperature, graphite phase gradually increased on DLC layer of the multilayer films, hardness and elastic modulus tended to first increase and then decrease. At higher slide speed, graphitization trend of the DLC layer intensifies, friction coefficient changes greatly, width and depth of wear tracks increase greatly, and wear is worse. Soft Ti metal layer and hard DLC layer in multilayer films can effectively improve friction and wear properties at high load. As heating temperature increases, graphite phase gradually increases in DLC layer, and transfer film is easier to be generated in friction process.

Synthesis and characterization of nickel-doped diamond-like carbon film electrodeposited at a low voltage

Electrodeposition, microstructure and tribological performance of Ni/(N) incorporated diamond-like carbon films

Friction and Wear Properties of Ni-P/Ti/DLC Multilayer Films

Electrodeposition, microstructure, friction and electrochemical behavior of diamond-like carbon (DLC) films with Ni/Cu interlayer

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Diamond-like Carbon Film Synthesized by Ion Beam Assisted Deposition and Its Tribological Properties

Electrodeposition and microstructure of Ni and B co-doped diamond-like carbon (Ni/B-DLC) films

The Effects of Ti/Ni Doping on the Friction and Wear Properties of DLC Coatings

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Microstructure and Tribological Properties of Diamond-Like Carbon and Tialsicn Nanocomposite Coatings

Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process

Molecular dynamics simulation of hybrid structure and mechanical properties of DLC/Ni-DLC thin films

Mechanical and Tribological Properties of Diamond-Like Carbon Films Deposited by Electron Cyclotron Resonance Microwave Plasma Chemical Vapor Deposition

Surface characteristics and corrosion behavior of DLC film on NiTi alloys

A study of the wear mechanism of diamond-like carbon films

Studies of Diamond-Like Carbon Films Prepared by Ion Beam-Assisted Deposition

Effect of PDDA‐MWCNTs concentration on the microstructure and friction behavior of Co‐doped diamond‐like carbon (Ni/N/MWCNTs‐DLC) films

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Microstructure, wear and corrosion behavior of nano-CeO2 doped diamond-like carbon (DLC) composite films

Mechanical properties of La2O3 doped diamond-like carbon films

Fatigue and Frictional Behavior of Diamond-like Carbon Films Deposited by Filtered Cathodic Vacuum Arc Technique