Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The present-day structural application requires advanced materials at extreme conditions, and the development of it is not economically feasible. As a result, existing material in the composite form has more visibility to suit the purpose. The material's strengths and qualities must be examined before it can be recommended for use in harsh conditions. In the present study, Al2O3 (3, 6, 9, 12, and 15 wt.%) and ZrO2 particles (2 wt.%) are reinforced with Al-Mg-Si alloy (Al 6061), which possess good isotropic behaviour and better interface bonding. The double stir casting process was adopted for the hybrid composite development, and the samples were cold rolled to reduce grain size and pores in the composites. The developed composites were subjected to mechanical characterisation tests such as hardness, tensile, compression, impact and flexural tests. An increase in reinforcement percentage enhances the mechanical properties. The improvement was attributed to the high thermal mismatch and reduction in the inter-particle distance by cold rolling and the reinforcements. Scanning electron microscope microstructural examination was conducted, and even dispersion of 3 to 15 wt.% Al2O3 reinforcements was observed. Tensile elongation decreases with an increase in reinforcement percentage. High elastic modulus and temperature mismatch between matrix and reinforcements increase the strength of the composites. The fracture behaviour of the composites generally showed dimples which are characteristics of ductile fracture, except at 15 wt.% Al2O3 / 2 wt.% ZrO2 showed a large portion of cleavage planes and grain cracking. The Al-Mg-Si alloy is reinforced with 9 wt%. Al2O3 / 2 wt.% ZrO2 had the best properties suitable for its use in different structural applications.

Microstructure and Mechanical Performances of High Strength ZTA/LaAl<sub>11</sub>O<sub>16</sub> Composites

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Microstructure and mechanical properties of Zn based composites reinforced by Ti3AlC2

Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder bed fusion

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms

Microstructures and mechanical properties of the in-situ formed nanocomposites of (ZrB2 + Al2O3) and AA7055 alloy

Microstructure, Mechanical Properties and Fracture Mechanism of Ti2AlC Reinforced AZ91D Composites Fabricated by Stir Casting

ZrO 2 Strengthened NiAl/Cr（Mo,Hf） Composite Fabricated by Powder Metallurgy

Microstructure and mechanical properties of textured high‐entropy M4AlC3/Al2O3 (M = Ti, V, Mo, Nb, Ta) composites

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructure and Mechanical Properties of ZTA Composites Fabricated by Oscillatory Pressure Sintering

Experimental investigation on the mechanical performance of the Al2O3 and ZrO2 added Al-Mg-Si alloy for structural applications

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

High strength Al<SUB>2</SUB>O<SUB>3p</SUB>/6061 Al composites: effect of particles, subgrains and precipitates

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

High Strength Al(2)O(3)P/6061 Al Composites: Effect Of Particles, Subgrains And Precipitates

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC