Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Finite Element Analysis Of Bearing Behavior For The Curved Box-Girders Of Hefei Xinqiao International Airport Terminal

Column Effective Length Factor and Girder Parametric Analysis for the Components of Xinqiao International Airport Terminal

Parametric Analysis of Bearing Behavior for Curved Box-Girders of Large Span Steel Structure

Bearing Behavior of the Curved Box-girder Models of Hefei Xinqiao International Airport Terminal

Finite Element Analyses Of Truss-To-Box Beam Connections In Steel Frames Of Hefei Xinqiao International Airport Terminal

An analytical method and its application for large-section PC box girder bridges

Finite Element Analyses and Design Proposals on the Truss-to-Box Girder Connection Models of Xinqiao International Airport Terminal

Design and Analysis of Section-Iii Cable Net Curtain Wall of Hefei Xinqiao International Airport Terminal

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Design and Analysis of Cable Net Curtain Walls of Hefei Xinqiao International Airport Terminal

Revisiting the Bearing Stresses in Webs of Crane Runway Girders under Wheel Loads

Construction Simulation Analysis of Portal Frame Steel Structure of Terminal Building in Hefei's New Airport

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

AN INSIGHT INTO FORMULAS FOR PREDICTING THE LOCAL BEARING STRESS IN WEBS OF CRANE RUNWAY BEAMS

Simulation Analysis of Assembling Truss Block Construction for Steel Structure in Hefei Xinqiao Airport Terminal

Influence Analysis of Cable-Nets Structure′s Prestress in Glass Curtain Wall on Bearing Property of Side Frame Column

The steel structure system comparison of Hefei Xinqiao Airport Terminal based on the seismic response under multi-support excitations

ULTIMATE BEARING CAPACITY OF CONCRETE FILLED RECTANGULAR BOX UNDER BIAXIAL BENDING MOMENT AND AXIAL FORCE

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Key Technical Problems on Structural Analysis of Terminal of Guangzhou New Baiyun International Airport

Structure Design of Hefei Xinqiao International Terminal