Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Simulation of Polarization-Insensitive Multiple-Quantum-well Superluminescent Diodes

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Polarization-insensitive Quantum Well Optoelectronic Devices Using Quantum Well Shape Modification

Polarization Insensitive InGaAs/InGaAsP/InP Amplifiers Using Quantum Well Intermixing

Ultra-broadband Depolarization Based on Directly-Coupled Quantum Wire-to-well Modulation and Their Aliasing Effect for Polarization-Insensitive Light-Emitting Diodes.

Polarization Insensitive Gain Medium with Hybrid Strained Quantum Well

Difference of luminescent properties between strained InAsP/InP and strain-compensated InAsP/InGaAsP MQWs

Semiconductor Optical Amplifiers with Wide Gain Bandwidth and Enhanced Polarization Insensitivity Based on Tensile-Strained Quantum Wells

Multi-bandgap Photonic Materials and Devices Fabricated by UV-laser Induced Quantum Well Intermixing

InGaAs/InGaAsP Diffused Quantum Wells Optical Amplifiers and Modulators

Ultracompact Electrooptic Silicon Modulator With Horizontal Photonic Crystal Slotted Slab

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Gain-Guiding Anisotropic Polarized Amplified Spontaneous Emissions from C-Plane ZnO/ZnMgO Multiple Quantum Wells

Low drive voltage optical phase modulator with novel InGaAlAs/InAlAs multiple-quantum-barrier based n-i-n heterostructure.

Influence of Carrier Transport on Performance of SLALOM with a Polarization-Independent MQW SLA

Modal Gain Characteristics of a Two-Section InGaAs/GaAs Double Quantum Well Passively Mode-Locked Laser with Asymmetric Waveguide

Broadband Quantum Dot Superluminescent Diode with Simultaneous Three-State Emission

All-Optical Valley Polarization Switch Via Controlling Spin-Triplet and Spin-Singlet Interlayer Exciton Emission in WS2/WSe2 Heterostructure.

Influence Of Polarization-Induced Electric Field On The Wavelength And The Absorption Coefficient Of The Intersubband Transitions In Alxga1-Xn/Gan Double Quantum Wells

Optimization of Multiple Quantum Well Electroabsorption Modulators Based on Transmission Performance Simulation