Abstract:Heavy metals in industrial wastewaters are typically present as stable metal–organic complexes with their cost-effective treatment remaining a significant challenge. Herein, a self-enhanced decomplexation scenario is developed using an electrochemical membrane filtration (EMF) system for efficient decomplexation and Cu recovery. Using Cu-EDTA as a model pollutant, the EMF system achieved 81.5% decomplexation of the Cu-EDTA complex and 72.4% recovery of Cu at a cell voltage of 3 V. The •OH produced at the anode first attacked Cu-EDTA to produce intermediate Cu-organic complexes that reacted catalytically with the H2O2 generated from the reduction of dissolved oxygen at the cathode to initiate chainlike self-enhanced decomplexation in the EMF system. The decomplexed Cu products were further reduced or precipitated at the cathodic membrane surface thereby achieving efficient Cu recovery. By scavenging H2O2 (excluding self-enhanced decomplexation), the rate of decomplexation decreased from 8.8 × 10–1 to 4.1 × 10–1 h–1, confirming the important role of self-enhanced decomplexation in this system. The energy efficiency of this system is 93.5 g kWh–1 for Cu-EDTA decomplexation and 15.0 g kWh–1 for Cu recovery, which is much higher than that reported in the previous literature (i.e., 7.5 g kWh–1 for decomplexation and 1.2 g kWh–1 for recovery). Our results highlight the potential of using EMF for the cost-effective treatment of industrial wastewaters containing heavy metals.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05554?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05554</a>.Section S1: Assembly of the membrane module; Section S2: Setup of the EMF reactor; Section S3: Setup of the H-type two-compartment electrochemical cell; Section S4: Characterizations of the titanium mesh and conductive membrane; Section S5: Membrane properties of the conductive membrane; Section S6: Filtration test of the conductive membrane using real wastewater; Section S7: Evolution of H2O2 concentration during each experiment; Section S8: TMP evolution during the experiment; Section S9: Rate constants obtained in the two-compartment cell experiment; Section S10: Desorption results of each experiment; Section S11: Intermediates formed at different voltages; Section S12: Decomplexation experiments of each Cu-organic complex; Section S13: Evolution of the Cu(I) species concentration during each experiment; Section S14: Probability of decomplexation or reduction/precipitation of certain intermediates; Section S15: Cyclic voltammograms under an anodic scan; Section S16: Decomplexation and Cu recovery performance in the treatment of real wastewater; Section S17: mass transfer rate constant calculation; and Section S18: Energy efficiency and EE/O calculation (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05554/suppl_file/es0c05554_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cu(Ⅱ)Reduction from Bismuth Metallurgical Wastewater by a Membrane-free Bioelectrochemical System

Copper reduction in a pilot-scale membrane-free bioelectrochemical reactor.

Removal of Hexavalent Chromium from Wastewater by Cu/Fe Bimetallic Nanoparticles

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

A membrane-free baffled microbial fuel cell for cathodic reduction of Cu(II) with electricity generation.

Bioreduction of Chromate in a Methane-Based Membrane Biofilm Reactor

Sulfate-reducing bacteria-based bioelectrochemical system for heavy metal wastewater treatment: Mechanisms, operating factors, and future challenges

Simultaneous removal of multiple heavy metals using single chamber microbial electrolysis cells with biocathode in the micro-aerobic environment

Self-Enhanced Decomplexation of Cu-Organic Complexes and Cu Recovery from Wastewaters Using an Electrochemical Membrane Filtration System

Toxicity Assessment of Copper by Electrochemically Active Bacteria in Wastewater

Bioelectrochemical Recovery of Ammonia-Copper(ii) Complexes from Wastewater Using a Dual Chamber Microbial Fuel Cell.

Sequentially recover heavy metals from smelting wastewater using bioelectrochemical system coupled with thermoelectric generators

Efficient in Situ Utilization of Caustic for Sequential Recovery and Separation of Sn, Fe, and Cu in Microbial Fuel Cells

A pilot-scale sulfur-based sulfidogenic system for the treatment of Cu-laden electroplating wastewater using real domestic sewage as electron donor

Mechanism of Combination Membrane and Electro-Winning Process on Treatment and Remediation of Cu2+ Polluted Water Body

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

Efficient Removal of Organic Contaminants in CuS-Mediated Solid-Liquid-Interfacial Fenton-Like System: Role of Bimetallic Cycle and Sulfur Species

Effective oxidation decomplexation of Cu-EDTA and Cu2+ electrodeposition from PCB manufacturing wastewater by persulfate-based electrochemical oxidation: Performance and mechanisms

Enhanced chromium recovery and simultaneous sludge degradation in a novel bioelectrochemical system assembled with bio/abio-cathodes

Recycling Cu(II) from complexing copper wastewater using ferrous sulfide stabilized by carboxymethyl cellulose: efficiency and mechanism insights

Clean and efficient preparation of metallic bismuth from methane-sulfonate electrolyte in the membrane electrolysis cell