Abstract:Smelting wastewater is characterized with high concentration of toxic heavy metals and high acidity, which must be properly treated before discharge. Here, bioelectrochemical system (BES) coupled with thermoelectric generator (TEG) was first demonstrated to simultaneously treat organic wastewater and smelting wastewater by utilizing the simulated waste heat that was abundant in smelting factories. By modulating the input voltage generated from simulated waste heat via TEG to 0, 1.0 and 2.0 V, almost all the Cu2+, Cd2+ and Co2+ in smelting wastewater were sequentially recovered with a respective rate of 121.17, 158.20 and 193.87 mg L−1 d−1. Cu2+ was bioelectrochemically recovered as Cu0. While, Cd2+ and Co2+ were recovered by electrodeposition as Cd(OH)2, CdCO3 or Co(OH)2 on cathodic surface. High throughput sequencing analysis showed that the microbial community of anodic biofilm was greatly shifted after successive treatment by batch-mode. Desulfovibrio (17.00%), Megasphaera (11.81%), Geobacter (10.36%) and Propionibacterium (8.64%) were predominant genera in anodic biofilm enriched from activated sludge in BES before treatment. After successive treatment by batch-mode, Geobacter (34.76%), Microbacter (8.60%) and Desulfovibrio (5.33%) were shifted as the major genera. Economic analysis revealed that it was feasible to use TEG to substitute electrical grid energy to integrate with BES for wastewater treatment. In addition, literature review indicated that it was not uncommon for the coexistence of waste heat with typical pollutants (e.g. heavy metal ions and various biodegradation-resistant organic wastes) that could be treated by BES in different kinds of factories or geothermal sites. This study provides novel insights to expand the application potentials of BES by integrating with TEG to utilize widespread waste heat.

Toxicity Assessment of Copper by Electrochemically Active Bacteria in Wastewater

Detection of Heavy Metal Toxicity Using Cardiac Cell-Based Biosensor

Visual detection of the toxicity of wastewater containing heavy metal ions using a microbial fuel cell biosensor with a Prussian blue cathode

Bacterial Leaching of Discarded Copper Ores from Yongping, China

Systematic and long-term technical validity of toxicity determination and early warning of heavy metal pollution based on an automatic water-toxicity-determination-system

An innovative fast-start aerobic anode microbial fuel cell biosensor for copper ion detection

Dual-signal-biosensor Based on Luminescent Bacteria Biofilm for Real-Time Online Alert of Cu(II) Shock

Highly sensitive standardized toxicity biosensors for rapid water quality warning

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

A dual chamber microbial fuel cell based biosensor for monitoring copper and arsenic in municipal wastewater

Cu(Ⅱ)Reduction from Bismuth Metallurgical Wastewater by a Membrane-free Bioelectrochemical System

Application of Bioassays to Evaluate a Copper Contaminated Soil Before and after a Pilot-Scale Electrokinetic Remediation

Sensing Copper and Ferricyanide Ions in Wastewater Using a Membrane-Less, Easy-to-Use Soil Microbial Fuel Cell-Based Sensor

Response of electroactive biofilms from real wastewater to metal ion shock in bioelectrochemical systems

An electroactive biofilm-based biosensor for water safety: Pollutants detection and early-warning

Detoxification of copper and zinc from anaerobic digestate effluent by indigenous bacteria: Mechanisms, pathways and metagenomic analysis

SENSITIVE COMMUNITY RESPONSES OF MICROBIOTA TO COPPER IN SEDIMENT TOXICITY TEST.

Sequentially recover heavy metals from smelting wastewater using bioelectrochemical system coupled with thermoelectric generators

Microbial electrochemical sensor for water biotoxicity monitoring

Feasibility investigation and development of microbial electrochemical biosensors for marine pollution monitoring

Development of an Electrostatic Model Predicting Copper Toxicity to Plants