Abstract:Although Castellaniella species are crucial for denitrification, there is no report on their capacity to carry out denitrification and anode respiration simultaneously in a bioelectrochemical system (BES). Herein, the ability of a mixed inoculum of electricigenic Castellaniella species to perform simultaneous denitrification and anode respiration coupled with cathodic metals recovery was investigated in a BES. Results showed that 500 mg/L NO3--N significantly decreased power generation, whereas 100 and 250 mg/L NO3--N had a lesser impact. The single-chamber MFCs (SCMFCs) fed with 100 and 250 mg/L NO3--N concentrations achieved a removal efficiency higher than 90% in all cycles. In contrast, the removal efficiency in the SCMFCs declined dramatically at 500 mg/L NO3--N, which might be attributable to decreased microbial viability as revealed by SEM and CLSM. EPS protein content and enzymatic activities of the biofilms decreased significantly at this concentration. Cyclic voltammetry results revealed that the 500 mg/L NO3--N concentration decreased the redox activities of anodic biofilms, while electrochemical impedance spectroscopy showed that the internal resistance of the SCMFCs at this concentration increased significantly. In addition, BES inoculated with the Castellaniella species was able to simultaneously perform heterotrophic anodic denitrification and cathodic metals recovery from real wastewater. The BES attained Cu2+, Hg2+, Pb2+, and Zn2+ removal efficiencies of 99.86 +/- 0.10%, 99.98 +/- 0.014%, 99.98 +/- 0.01%, and 99.17 +/- 0.30%, respectively, from the real wastewater. Cu2+ was bio-electrochemically reduced to Cu-0 and Cu2O, whereas Hg-0 and HgO constituted the Hg species recovered via bioelectrochemical reduction and chemical deposition, respectively. Furthermore, Pb2+ and Zn2+ were bio-electrochemically reduced to Pb-0 and Zn-0, respectively. Over 89% of NO3--N was removed from the BES anolyte during the recovery of the metals. This research reveals promising denitrifying exoelectrogens for enhanced power generation, NO3--N removal, and heavy metals recovery in BES.

Sequentially recover heavy metals from smelting wastewater using bioelectrochemical system coupled with thermoelectric generators

A Novel Microbial Electrolysis Cell (MEC) Reactor for Biological Sulfate-Rich Wastewater Treatment Using Intermittent Supply of Electric Field

Synergistic light irradiation and circuital current for efficient mineralization of recalcitrant organics and sequential recovery of heavy metals from etching terminal wastewater using photo-assisted bioelectrochemical systems

Sulfate-reducing bacteria-based bioelectrochemical system for heavy metal wastewater treatment: Mechanisms, operating factors, and future challenges

Photo-assisted Self-Driven Bioelectrochemical Systems for Simultaneous Enhanced Treatment of Etching Terminal Wastewater and Selective Recovery of Heavy Metals

Recovery of Heavy Metals from Industrial Wastewater Using Bioelectrochemical System Inoculated with Novel Castellaniella Species.

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

Systematically assessing genetic strategies for engineering electroactive bacterium to promote bioelectrochemical performances and pollutant removal

Simultaneous removal of multiple heavy metals using single chamber microbial electrolysis cells with biocathode in the micro-aerobic environment

Electronic and Metagenomic Insights into the Performance of Bioelectrochemical Reactor Simultaneously Treating Sewage Sludge and Cr(VI)-laden Wastewater

Contaminant Removal and Resource Recovery in Bioelectrochemical Wastewater Treatment

Bioelectrochemical Systems for Efficient Recalcitrant Wastes Treatment

Sequential Recovery of Copper and Nickel from Wastewater Without Net Energy Input

Heterotrophic Anodic Denitrification Coupled with Cathodic Metals Recovery from On-Site Smelting Wastewater with a Bioelectrochemical System Inoculated with Mixed Castellaniella Species

Electrified bioreactors: the next power-up for biometallurgical wastewater treatment

Removal of heavy metals from fly ash using electrodialysis driven by a bioelectrochemical system: a case study of Pb, Mn, Cu and Cd

Energetically Self-Sustaining Treatment of Swine Wastewater in a Microbial Electrochemical Technology-Centered Hybrid System

Efficient Pretreatment of Industrial Estate Wastewater for Biodegradability Enhancement Using a Micro-Electrolysis-circulatory System.

Complete removal of heavy metals with simultaneous efficient treatment of etching terminal wastewater using scaled-up microbial electrolysis cells

A comprehensive review on bio-electrochemical systems for wastewater treatment: process, electricity generation and future aspect

Enhanced etching terminal wastewater treatment and H2 production by in-situ deposited heavy metals on carbon dots/g-C3N4 photocathode microbial electrolysis cells