Abstract:Soy protein (SP) adhesives can resolve several problems with aldehyde-based adhesives, including formaldehyde release and excessive dependence on petroleum-based materials. Nevertheless, their development is hindered by the lack of balance between fluidity and high cold-pressing adhesive strength. A dynamically cross-linked SP adhesive with excellent fluidity and cold-pressing adhesion was developed in this study based on the polyphenol-metal ion redox-induced gelation system. SP was blended with acrylamide (AM), ammonium persulfate (APS), and the tannic acid (TA)-Fe3+ complex to prepare an adhesive gel precursor with good fluidity. In situ gelation of SP adhesive was then achieved via AM polymerization, as initiated by redox between TA and Fe3+. As expected, the prepared adhesive gel exhibited outstanding cold-pressing bonding strength (650 kPa) to the veneers compared to the neat SP adhesive, which has almost no cold-pressing bonding strength to the veneers. The TA-Fe3+ complex induced an in situ gelation system, which endowed the SP adhesive with strong cohesion; the topological entanglement of the adhesive gel in the veneers contributed to tight interfacial combinations. The TA-Fe3+ complex served not only as an accelerator of SP adhesive gelation but also as a "cross-linking core" for the cross-link SP adhesive system. The prepared SP-based adhesive also exhibited outstanding hot-pressing bonding strength and mildew resistance. The proposed polyphenol-metal ion-induced in situ gelation strategy may provide a new approach for developing advanced vegetable protein adhesives to replace aldehyde adhesives.

Study on preparing transparent solid adhesive rod

Study on preparing solid correction glue stick based on polyvinyl formal

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

EFFECT OF DIOCTYLPHTHALATE AS PLASTICIZER ON THE PERFORMANCES OF UV CURABLE ADHESIVE

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Effects of Active Diluents on Solidifying Process of UV-curing Reaction for Polyurethane Acrylate

Study on structure and properties of glyoxal-urea-formaldehyde copolycondensation resin

Study on contamination–free and transparent two–component PU adhesive

Study on Preparation of Environment Friendly Urea Formaldehyde Resins Adhesive with High Shear Strength

Preparation and Properties of in Situ Polymerization of Poly (vinyl Chloride)

Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

Preparation of starch polyols adhesive

Synthesis of Room Temperature Curable Polymer Binder Mixed with Polymethyl Methacrylate and Urethane Acrylate for High-Strength and Improved Transparency

Polyphenol-Metal Ion Redox-Induced Gelation System for Constructing Plant Protein Adhesives with Excellent Fluidity and Cold-Pressing Adhesion.

PREPARATION AND PROPERTIES OF TRANSPARENT COATING FOR POLYACRYLATES COPOLYMER MODIFIED WITH ORGANOSILICON

Preparation of Polyacrylate Emulsion with High Adhesion Properties by Adding Modified Silica Sol

Study on Synthesis of UV Potting Adhesive and the Temperature Characteristics of Optical Fiber Coil

Study on stabilization of polyamide hot melt adhesive

Preparation and properties of isocyanate prepolymer/corn starch adhesive

Study on the composition and adhesion of resorcin-formaldehyde/rubber adhesive

Preparation optimization by response surface and performance characterization of PEG-urea-dialdehyde starch adhesive