Abstract:Fringe patterns are typically produced as the results of traditional optical Nondestructive Evaluation (NDE) employing digital shearography. Structural flaws affect the response of the surrounding material to a certain loading, resulting in unique fringe patterns that are related to the local deformation. Smaller defect information, however, can be easily lost in the fringe pattern caused by global deformation during the flaw detection procedure. In order to improve the flaw detection capabilities of this technology, it is important to streamline the inspection process and to simplify the interpretation of the results. This study proposes a practical and effective methodology that experimentally removes fringe patterns caused by global deformation in digital shearography and only retains the defect information. For shearographic Non-Destructive Testing (NDT), two sets (3 or 4 images) of temporal phase-shifted interferograms under different loads P 1 and P 2 are recorded. This novel approach involves recording one additional set of temporal phase-shifted interferograms at a load between P 1 and P 2 , e.g. P 1' . Two phase maps of shearograms can be generated using the phase shift technique, corresponding to the two loads Δ 2 = (P 1' -P 1 ) and Δ 1 = (P 2 -P 1 ), respectively. Because of the nondestructive nature of the testing, the magnitude of the loads P 1 and P 2 is small, and the 1st derivative of global deformation in the shearing direction of the test part is assumed to be linear. Therefore, a linear coefficient C based on the two shearograms can be determined. The information from global deformation is then removed by subtracting the shearogram generated with the small load Δ 2 multiplied by the correlation coefficient C from the one obtained with the relatively large load Δ 1 . This technique is further improved by calculating a complete surface linear coefficient C ij , which improves the detail processing of the deformation of samples with complex geometry and mechanical properties. This technique is shown to effectively assess a wide range of structures, including aluminum specimens with prepared flaws and intricate composite laminates. The experimental findings demonstrate that the suggested technique improves the non-destructive testing capabilities of digital shearography, thereby simplifying defect detection and visualization.

Quantitative Analysis on Parameters of a Defect with Speckle Interferometry and Finite Element Optimization Method

Quantitative Analysis of Defect Parameters by Shearing Speckle Interferometry and Finite Element Optimization Method

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Numerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Numerical simulation research and applications on scattering imaging of surface defects on optical components

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Error Analysis of Spherical Scanning Mechanism Used for Surface Defects Detection

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Quantitative Detection of the Defects in Thin-Walled Pressure Vessels with Holography and Shearing Speckle Interferometry

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Quantifying Geometry Parameters of Defect in Multi-layered Structures from Eddy Current Nondestructive Evaluation Signals by Using Genetic Algorithm

Digital shearography for NDT: Study on a novel experiment based method for removing global deformation ✰

A Novel Defect Quantification Method Utilizing Multi-Sensor Magnetic Flux Leakage Signal Fusion

Research on Defect Detection of Large-Aperture Multi-Faceted Optical Components

Dynamic Localization and Transient Profile Reconstruction of Internal Defect Based on a Dual-Channel Speckle Interferometer