Abstract:In this study, the amorphous C, ZrB2 and BN single-layer coatings as well as C/BN, C/ZrB2, ZrB2/BN and C/ZrB2/BN composite-coatings were prepared on SiCf by an in-situ synthesis and solution impregnation-pyrolysis method. Subsequently, SiCf/SiBCN composites were fabricated by hot-pressing sintering at 1900 ℃/60 MPa/30 min to explore the influence of different coatings on the microstructure and mechanical performance of resulting composites. After preparation of single-layer coated SiCf, the SiCf(BN) or SiCf(ZrB2) tended to be overlapped with each other, while the dispersion of amorphous C coated SiCf was satisfying. Besides, some uneven areas and attached particles have appeared on fiber surfaces of the SiCf(BN) or SiCf(ZrB2), whereas smooth and dense surfaces of amorphous C coated SiCf were observed. Since the uniformity of ZrB2 coatings can be partially damaged by the subsequent coating process of BN, the composite-coatings of ZrB2/BN and C/ZrB2/BN were thereby not suitable for strengthening SiBCN matrix. The SiCf/SiBCN composites with C/ZrB2 coatings have desirable comprehensive mechanical properties. Nevertheless, the conventional toughening mechanisms like fiber pull-out and bridging, and crack deflection are not available for these composites since the serious crystallization of SiCf leading to great strength loss, resulting in catastrophic brittle fracture.

Effects of Carbon Fiber CVD SiC Coatings on Mechanical Properties of C/SiC Composites

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Effect of SiC coating and heat treatment on damping behavior of C/SiC composites

Synthesis of coatings on SiC fibers and their effects on microstructure and mechanical properties of SiC f /SiBCN composites

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Interfacial modification and oxidation resistance behavior of a CVD-SiC coating for C/SiC composites

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances

Enhanced thermal and mechanical properties of optimized S i C f / S i C composites with in-situ CNTs on PyC interface

Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers

Investigation of Impact of C/Si Ratio on the Friction and Wear Behavior of Si/SiC Coatings Prepared on C/C-SiC Composites by Slurry Reaction Sintering and Chemical Vapor Infiltration

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite