Abstract:Boron trace determination in biological materials is needed in different fields of application. Direct B determination by means of Graphite Furnace Atomic Absorption Spectrometry (SS-GFAAS) has been used in the past for this purpose, offering good detection limits hardly achievable by other techniques. However, such methods require the use of high atomization temperatures combined with large integration times to promote B atomization, which dramatically reduces the lifetime of the instrument's graphite parts. In this work, a new perspective for B determination by means of Graphite Furnace Molecular Absorption Spectrometry (GFMAS) is proposed. B was detected as the diatomic molecule BF (boron monofluoride), deploying a gas phase reaction with CH3F as fluorinating agent. Based on this strategy, a method for the direct determination of B in two biological certified reference materials (NIST SRM 1570a spinach leaves and NIST SRM 1573 tomato leaves) has been developed, providing similar detection capabilities to the GFAAS method (LOD of 0.24 ng) but requiring much milder furnace conditions. Moreover, the appearance of memory effects, very common in GFAAS methods, is also avoided with this method. Straightforward calibration with aqueous standards was also found to be possible. To this end, a mixture of W (permanent), citric acid, and Ca as chemical modifiers was found to be essential for obtaining a reproducible and sufficiently sensitive signal for boron solutions, comparable to the signals obtained for the solid samples. With this method, accurate results were obtained for the direct analysis of both certified reference materials, provided that spectral interferences from the PO molecule were properly corrected. Precision values in the range of 15% RSD, as typically reported for direct solid sampling GFAAS, were found. Finally, and as an additional advantage of the GFMAS method, a large isotopic shift in the absorbance of the 10BF and 11BF molecules can be accurately monitored at a secondary transition for the BF molecule. This offers novel analytical possibilities for the method, which are also explored in this study. In this regard, control of the B concentration was found to be critical for obtaining accurate and precise isotope ratios for this element.

Indirect Determination of Trace Boron and Phosphorus in Steel by Flame Atom Absorption Spectrometry

Comparison of Methods of Determination of Boron in Steel by Spectrophotometry and by Flame AAS

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of boron in high-temperature alloy steel using non-linear inter-element correction and microwave plasma-atomic emission spectrometry

Determination of Arsenic in Food-Additive Phosphoric Acid by Atomic Florescence Spectrometry

FI-FAAS Determination of Trace Amounts of Lead with On-line Enrichment by Phosphate Precipitation

Boron elemental and isotopic determination via the BF diatomic molecule using high-resolution continuum source graphite furnace molecular absorption spectrometry

Determination of Sr Content in Mg-Sr Alloys Using Faas

Determination Of Boron By Microwave Plasma Torch Atomic Emission Spectrometry Using On-Line Separation And Preconcentration Technique

Determination of trace copper in water sample by flame atomic absorption spectrometry with cloud point extraction preconcentration

Sensitive Determination of Lead by Flame Atomic Absorption Spectrometry Improved with Branched Capillary As Hydride Generator and Without Phase Separation

Determinations of Trace Boron in Superalloys and Steels Using Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence

Determination of Trace Amounts of Boron by Microwave Plasma Torch Atomic Emission Spectrometry Using an On-Line Separation and Preconcentration Technique

Determination of Calcium and Iron in Cola Cao by Flame Atomic Absorption Spectrometry with Suspension Sampling

Inductively Coupled Plasma Atomic Emission Spectrometric Determination of Boron in Polycrystalline Silicon Based on the Formation of Potassium Fluoborate

Cloud Point Extraction and Flame Atomic Absorption Spectrometric Determination of Trace Iron in Water Samples

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

Determination of boron in soybean and rolls of dried bean milk cream by graphite furnace atomic absorption spectrometry

Determination of Trace Element Phosphorus in 23co14ni12cr3moe Ultrahigh Strength Steel

Determination of Vanadium (Ⅴ) in isteel samples by FIA and dual-beam spectrophotometric methed with dibromo-p-methyl-sulphochlorophenol

Flame Furnace Atomic Absorption Spectrometry: A Review