Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Influences of precursor pH value on the sol-gel prepared LiFePO4

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Effect of precursor FePO_4·2H_2O on electrochemical properties of LiFePO_4

SYNTHESIS AND CHARACTERIZATION OF <font>LiFePO</font><sub>4</sub>/<font>C</font> PREPARED VIA A SOL–GEL METHOD

Synthesis And Electrochemical Characteristics Of Lifepo4/C Cathode Materials From Different Precursors

Sol-gel synthesis of LiFePO4 cathode

Impact of Ph on Morphology and Electrochemical Performance of LiFePO4 As Cathode for Lithium-ion Batteries

Preparation and Performance of FePO_4 Precursor for LiFePO_4

Effects of Solvents and Ph Values on Synthesis of LiFePO4/C Prepared Via a Sol-Gel Route

Synthesis and Characterization of Lifepo4/C Prepared Via A Sol-Gel Method

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

Influence Mechanism of Precursor Crystallinity on Electrochemical Performance of LiFePO4/C Cathode Material

Influences of Precursor'S Processing Method on the Electrochemical Properties of Synthesized Lithium Vanadium Phosphate

Preparation and Characterization of LiFePO[sub 4] from a Novel Precursor of NH[sub 4]fepo[sub 4]⋅h[sub 2]O

Effects of Iron Sources on Structure and Electrochemical Properties of LiFePO4/C Prepared by Sol-Gel Method

Research on Preparation of Nano-porous Lithium Iron Phosphate for Lithium-ion Battery Electrode Materials

Study on the Electrochemical Performance of Carbon-Coated LiFePO4 Prepared by Sol-Gel Method

Preparation of Precursor FePO4 and Its Effects on Electrochemical Properties of LiFePO4

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Preparation and Characterization of LiFePO4 Made from NH4FePO4·H2O

Effect of Electrode Preparation Technology and Electrolytes on the Performance of LiFePO4 Cathode Material for Lithium Ion Battery