Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Synthesis And Electrochemical Characteristics Of Lifepo4/C Cathode Materials From Different Precursors

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Effect of precursor FePO_4·2H_2O on electrochemical properties of LiFePO_4

Preparation and Characterization of LiFePO4 Made from NH4FePO4·H2O

Improving the rate performance of LiMn0.5Fe0.5PO4/C materials by the precursor method

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Preparation and Characterization of LiFePO[sub 4] from a Novel Precursor of NH[sub 4]fepo[sub 4]⋅h[sub 2]O

Preparation And Characterization Of Lifepo4 From A Novel Precursor Of Nh4fepo4 Center Dot H2o

Synthesis and Characterization of Lifepo4/C Prepared Via A Sol-Gel Method

Preparation and characterization of LiFePO4 made from NH4FePO4 center dot H2O

Preparation of Precursor FePO4 and Its Effects on Electrochemical Properties of LiFePO4

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

SYNTHESIS AND CHARACTERIZATION OF <font>LiFePO</font><sub>4</sub>/<font>C</font> PREPARED VIA A SOL–GEL METHOD

Synthesis, characterization and properties of LiFePO4/C cathode material

Influence Comparison of Precursors on LiFePO4/C Cathode Structure for Lithium Ion Batteries

Electrochemical Synthesis of Mesoporous Fepo4 Nanoparticles for Fabricating High Performance Lifepo4/C Cathode Materials

Research on Preparation of Nano-porous Lithium Iron Phosphate for Lithium-ion Battery Electrode Materials

LiFePO<sub>4</sub>/C Cathode Materials Prepared by One-Step Fast Carbothermal Method Using Fe<sub>2</sub>O<sub>3</sub> as Raw Materials

LiFePO4 As Cathode Material of Li-ion Battery