Abstract:Traditional TiN coatings cannot meet the requirements in many applications under extreme conditions because of their relatively low hardness (similar to2000Hv), high friction coefficient (>0.4), inade- quate thermal stability and insufficient corrosion. (Ti,Al)N coatings are a promising alternative to TiN coatings, which have recently been obtained by some groups. However, The deposition of coatings on ceramic substrates prepared by traditional physical vapor deposition was puzzled by low adhesions. In this work, (Ti,Al)N deposition was realized by a new technique namely pulsed high energy density plasma. The ratio of Ti and Al atoms was kept constant at 1:1, since this was known to be the best ratio for (Ti,Al)N synthesis. However, the process allows many other deposition parameters to be varied. In this study, the influences of the discharge voltage between the inner and outer electrode, the distance between the sample and the pulsed plasma gun, and the shot number of the pulsed plasma on coating formation and properties were investigated. Under the optimum deposition conditions, the adhesive strength of (Ti,Al)N coating to Si3N4 ceramic substrate was satisfactory with the critical load up to more than 80 mN. In addition, the coatings were investigated with respect to mechanical and wear behavior, including nanohardness, Young's modulus and cutting performances. The (Ti,Al)N coatings possess resulted very high values of nanohardness and Young's modulus, which are near to 40 GPa and 680 GPa, respectively. Because of the deposition of (Ti,Al)N coatings the wear resistance and edge life of the coated tools were improved dramatically evaluated by the cutting perforinances of the coated tools in turning HT250 (HB230) steel under industrial conditions. These improvements were attributed to a combination of four effects of deposition, ion implantation, quench and solid solution strengthening in terms of the structural analyses.

Research Progress of TiAlN Coating Tools

Tribological Properties and Preparation of (Ti,Al)N Coatings on High Speed Steel Substrate

Properties and Performance of TiAlSiN and AlCrN Monolayer and Multilayer Coatings for Turning Ti-6Al-4V

TiN coating of tool steels: a review

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718

Effect of Al Content on the Wear Evolution of Ti1-xAlxN-Coated Tools Milling Ti-6Al-4V Alloy

Mechanics and Cutting Performance of Multilayer Nanostructured TiAlN/TiSiN/ZrN Coatings

Microstructure and Properties of the AlCrSi(O)N Tool Coatings by Arc Ion Plating

Finite element analysis of Ti 1-x Al x N coated tools cutting performance and tool wear during Ti-6Al-4V milling

Structure control of high-quality TiAlN Monolithic and TiAlN/TiAl multilayer coatings based on filtered cathodic vacuum arc technique

TiC nano-coating and their tribological properties were deposited by doal-ion beam sputtering on the tool surface

Microstructure and Properties of TiAlN Coating Prepared by Magnetron Sputtering on Titanium Alloy

Application of Multiple Nitrogen-based Coatings for Cemented Carbide Tools: A Review

Investigation on the relationship between reinforcing behavior of TiN and wear resistance of AlCoCrCuNiTi high-entropy alloy coating

Study of TiAlN Coating Processing and Properties on New Tool Steel GDL-4

Characterization of Superhard Ternary (ti,al)n Coatings Prepared by Pulsed High Energy Density Plasma

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings

Study on the effect of texture on cutting performance of the coated tool with finite element analysis and experimental method

Analysis of tool wear of TiAlN coated tool, machined surface morphology and chip during titanium alloy milling

Study on the preparation of hard and wear-resistant titanium nitride films on silicon nitride ceramic cutting tools