Abstract:Abstract TiAlCoCr x FeNihigh-entropy alloys (HEAs) coatings were fabricated on the surface of Ti6Al4V by laser cladding. Their microstructural evolution with the increase in x value (x = 0, x = 1.0, x = 2.0) was investigated in detail. Besides that, the investigation into the effects of the Cr content on their corrosion behaviors and mechanical properties (in terms of hardness and wear resistance) was also carried out comprehensively. The results indicated that two kinds of phases (a solid solution with thehexagonal close-packed (HCP) structureand Ti 2 Ni) were synthesized in the coatings, and the HCP content was gradually increased with the increase in x accompanied with the decrease in Ti 2 Ni content. A HEA coating only composed of single HCP was successfully prepared when x reached 2.0. The electrochemical and immersion tests all confirmed that the coating with x = 2.0demonstrated the most excellent corrosion resistance in a0.1 mol·L −1 HCl solution from different aspects including corrosion tendency and corrosion rate without the applied potential, the formation difficult/stability of the passive film and the dissolution rate in the passive state, and corrosion surface morphology. The averagemicrohardness values of the coatings weregraduallyincreasedfrom 656HV 0.2 to 800 HV 0.2 with increasing xfrom 0 to 2.0, which wereabout double that of the substrate (350 HV 0.2 ). Wear resistance of the coatings also exhibited the upward tendency with increasing the x values (0.562 mm 3 at x = 2.0, 0.640 mm 3 at x = 1.0, 0.641 mm 3 at x = 0 and 1.419 mm 3 for the substrate). More Cr addition into the cladding material will contribute to the formation of a HEA coating composed of single HCPwith excellent corrosion and wear resistance.

Investigation on the relationship between reinforcing behavior of TiN and wear resistance of AlCoCrCuNiTi high-entropy alloy coating

An investigation on the wear and corrosion resistance of AlCoCrFeNi high-entropy alloy coatings enhanced by Ti and Si

Microstructure and wear resistance of in-situ TiC reinforced AlCoCrFeNi-based coatings by laser cladding

Microstructures and Wear Resistance of CoCrFeNi2V0.5Tix High-Entropy Alloy Coatings Prepared by Laser Cladding

Investigation into corrosion and wear behaviors of laser-clad coatings on Ti6Al4V

Microstructure and sliding wear behavior of HVOF sprayed Al(1−x)CoCrFeNiTix high-entropy alloy coatings

Addition Al and/or Ti Induced Modifications of Microstructures, Mechanical Properties, and Corrosion Properties in CoCrFeNi High-Entropy Alloy Coatings

Strengthening behavior of AlCoCrFeNi(TiN) high-entropy alloy coatings fabricated by plasma spraying and laser remelting

Preparation, mechanical properties and wear resistance of dual-sized TiC particles reinforced high-entropy alloy cermet coating

Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding

Microstructure and Friction Properties of CoCrFeMnNiTix High-Entropy Alloy Coating by Laser Cladding

Microstructure and Wear Resistance of FeCuNiTiAl High-Entropy Alloy Coating on Ti6Al4V Substrate Fabricated by Laser Metal Deposition

Effect of Ti on the wear behavior of AlCoCrFeNi high-entropy alloy during unidirectional and bi-directional sliding wear processes

In-situ development of Ti(C, N) and their effect on microstructure,wear and corrosion properties of CoCrFeNiTi high-entropy alloy matrix composites

Microstructure and Wear Behavior of AlxCo1.5CrFeNi1.5Tiy High-Entropy Alloys

Wear and high-temperature oxidation resistance of (AlCrFeTiV)100-xNix high-entropy alloy coatings prepared by laser cladding on Ti6Al4V alloy

Microstructure and wear behaviour of in-situ TiN-Al2O3 reinforced CoCrFeNiMn high-entropy alloys composite coatings fabricated by plasma cladding

Effect of TiC Addition on the High-Temperature Hardness and the Carbide Stability in Al0.2CoCrFeNi1.5Ti High-Entropy Alloy

Microstructure and wear behavior of mechanically alloyed powder AlxMo0.5NbFeTiMn2 high entropy alloy coating formed by laser cladding

Effect of Ti Content on the Microstructure and Corrosion Resistance of CoCrFeNiTix High Entropy Alloys Prepared by Laser Cladding

Wear-Resistant TiC Strengthening CoCrNi-Based High-Entropy Alloy Composite