Abstract:The present investigation endeavors to explore the influence of rare earth elements on the strength and plasticity characteristics of low-carbon microalloyed steel under tensile loading conditions. The findings from the conducted tensile tests indicate that the incorporation of rare earths leads to a notable enhancement in the yield strength, ultimate tensile strength, and ductility properties of the steel. A comparative analysis of the microstructures reveals that the presence of rare earths significantly refines and optimizes the microstructure of the microalloyed steel. This optimization is manifested through a reduction in grain size, diminution of inclusion sizes, and a concomitant rise in their number density. Moreover, the addition of rare earths is observed to foster an increase in the volumetric fraction of carbides within the steel matrix. These multifaceted microstructural alterations collectively contribute to a substantial strengthening of the microalloyed steel. Furthermore, it is elucidated that the synergistic interaction between rare earth elements and both carbon (C) and niobium (Nb) in the steel matrix augments the extent of the Lüders strain region during the tensile deformation of specimens. This phenomenon is accompanied by the effective modification of inclusions by the rare earths, which serves to mitigate stress concentrations at the interfaces between the inclusions and the surrounding matrix. This article systematically evaluates the modification mechanism of rare earth microalloying, which provides a basis for broadening the application of rare earth microalloying in microalloyed steel.

The strengthening mechanism of rare earth lanthanum oxide doped molybdenum alloys

Review on mechanical properties of powder metallurgy structural materials with rare earths strengthening

Effect of rare earth oxide doping on microstructure and mechanical property of Mo-30 W solid solution alloy

Achieving an unprecedented strength-ductility balance of molybdenum alloy by homogeneously distributing yttrium-cerium oxide

Boosted mechanical properties of sintered MoLa alloys with ultrafine-grains by the nanostructuring of secondary phase

Microstructure and compression properties of fine Al2O3 particles dispersion strengthened molybdenum alloy

Secondary phases effects on microstructure and mechanical properties of lanthanum-doped titanium‐zirconium‐molybdenum alloy

Nano Mo–La–O particles strengthened Mo alloys fabricated via freeze-drying technology and low temperature sintering

Doping N/O Impurities into a MoNbTiWZr Refractory Multi-Principal Element Alloy and the Strengthening Mechanism

Selective laser melting of lanthanum oxide-reinforced tungsten composites: microstructure and mechanical properties

Influence of rare earth oxides on microstructure and mechanical properties of nickel-based superalloys fabricated by high energy beam processing: A review

First-principles calculations to investigate thermodynamic and mechanical behaviors of molybdenum-lanthanum alloy

Effects of Rare-Earth Oxides Doping on Microstructures and Properties of Al2O3/TiAl Composites

Effects of the Rare Earth Y on the Structural and Tensile Properties of Mg-based Alloy: A First-Principles Study

The Origin of Exceptionally Large Ductility in Molybdenum Alloys Dispersed with Irregular-Shaped La2O3 Nano-Particles

Superior strength-ductility synergy of an oxide-dispersion strengthened CoCrNi-based multi-principal element alloy

Effect of Rare Earth Elements on Microstructure and Tensile Behavior of Nb-Containing Microalloyed Steels

Effect of minor lanthanum on the microstructures, tensile and electrical properties of Al-Fe alloys

Evaluation of tensile property and strengthening mechanism of Zirconia reinforced molybdenum alloy

Evolution of strength with rare-earth content in highly-alloyed Mg-Gd-Y alloys