Abstract:For the application of titanium and titanium alloys in orthopedic implant materials, the antibacterial properties and cell biocompatibility determine whether the implant surgery is successful. In this study, a functional anodic oxidation (AO) coating was successfully prepared to modify the surface of Ti-Ag alloy. The surface characteristics of the anodized Ti-Ag alloy were analyzed using techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. The corrosion characteristics of Ti-Ag samples were tested by an electrochemical workstation. In addition, the antibacterial properties and cell activity were studied by the plate count method and MC3T3-E1 cell staining. The results indicate that the AO process can generate a multi-functional TiO2/Ag2O coating with a large number of block and flower-like structures on the surface of a Ti-Ag alloy. When the AO voltage of the sample is 120 V, the maximum roughness is 0.73 μm and the minimum wetting degree is 23°, which improves the biocompatibility. The corrosion test results show that AO treatment can improve the corrosion resistance of a Ti-Ag alloy. The oxidation voltage is 20 V and the coating has the best corrosion resistance. The corrosion open circuit potential (Eocp) is 107.621 mV and the corrosion current density (icorr) is 2.241 × 10−8 A·cm−2. This coating can promote ion release and show more than 99% of a strong antibacterial ability against S. aureus. The results of the compatibility evaluation by cultured cells showed that the multifunctional coating formed by the anodic oxidation process did not cause cytotoxicity and promoted the adhesion of MC3T3-E1 cells.

Corrosion Behavior of Ti–5Ag Alloy with and Without Thermal Oxidation in Artificial Saliva Solution

The Effect on the Corrosion Resistance of Ti Alloy in the Artificial Saliva with Different pH Value

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Effect of Ag on the Corrosion Behavior of Ti–Ag Alloys in Artificial Saliva Solutions

Corrosion behavior of newly developed Ti-Ag-Fe dental alloys in neutral saline solution

Research development of corrosion of titanium in the oral bioenvironment

Corrosion Resistance and Ion Dissolution of Titanium Implant under Different Temperature Thermal Oxidation

Effect of anodic oxidation on the corrosion resistance and antibacterial properties of Ti-15Mo-9Ag for biomedical application

Surface Characterization and Cell Response of Binary Ti-Ag Alloys with CP Ti As Material Control

The Improvement of Wettability, Biotribological Behavior and Corrosion Resistance of Titanium Alloy Pretreated by Thermal Oxidation

Effect of Anodic Oxidation Pulse Voltage on Antibacterial Properties and Biocompatibility of Ti-Ag Alloy

The Electrochemical Behavior And Surface Analysis Of Ti49.6ni45.1cu5cr0.3 Alloy For Orthodontic Usage

Comparative Study on the Corrosion Behavior of Ti–Nb and TMA Alloys for Dental Application in Various Artificial Solutions

Effect of solid solution and aging treatment on the microstructure, mechanical properties, corrosion behavior and antimicrobial properties of Ti-5Mn alloys

The electrochemical behavior and surface analysis of Ti<sub>49.6</sub>Ni<sub>45.1</sub>Cu<sub>5</sub>Cr<sub>0.3</sub>alloy for orthodontic usage

The Physical and Antibacterial Properties of Argentine-Doped TiO2 Film on Stainless Steel Substrate

Microstructure, mechanical properties and corrosion behavior of Ti-Mo-Al shape memory alloy

Effect of Ph Value and Fluoride Ions on Corrosion Resistance of Pure Ti and Ni-Cr-Ti Alloy in Artificial Saliva

Thermal oxidation of novel Zr–Ti–Al–V alloy with high strength and toughness and its influence on the corrosion behavior

Development of Ti-Ag-Fe ternary titanium alloy for dental application.