Abstract:The aims of this study were to investigate the effects of Zr addition and potentiodynamic polarization on the microstructure and corrosion resistance of Ti-22Nb and Ti-22Nb-6Zr alloy samples. The corrosion tests were carried out in 0.9% NaCl at 37 degrees C and neutral pH value, utilizing the OCP, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. The results of XRD and optical microscopy indicated that the addition of Zr stabilized the P phase, which plays a crucial role in the corrosion resistance improvement of the Ti-22Nb-6Zr alloy. From the polarization curves, it can be seen that the alloys exhibited a wide passive region without the breakdown of the passive films and also low corrosion current densities. in addition, the values of the corrosion current densities and passive current densities decreased with the addition of 6 at% Zr into the Ti-22Nb alloy. The EIS results of these two alloy samples after 1-h immersion in 0.9% NaCl solution, and being fitted by R-S(Q(P)R(P)) model, suggested that the corrosion resistance of the passive films improved with the addition of Zr and only a single passive film formed on the surfaces. However, two time constants were observed for the Ti-22Nb and Ti-22Nb-6Zr alloy samples after potentiodynamic polarization, the spectra of which can be fitted using the R-S(Q(o)(R-o(Q(b)R(b)))) model. in addition, the corrosion resistance of the two alloy samples was reinforced significantly because of polarization when compared to the immersed samples. All these observations suggested a nobler electrochemical behavior of the titanium alloys with the addition of Zr element and after polarization.

Corrosion behavior of newly developed Ti-Ag-Fe dental alloys in neutral saline solution

Microstructure and Corrosion Resistance of Medical Cobalt-Based Alloys

The Effect on the Corrosion Resistance of Ti Alloy in the Artificial Saliva with Different pH Value

Corrosion Behavior of Ti–5Ag Alloy with and Without Thermal Oxidation in Artificial Saliva Solution

Effect of Ag on the Corrosion Behavior of Ti–Ag Alloys in Artificial Saliva Solutions

Development of Ti-Ag-Fe ternary titanium alloy for dental application.

Electrochemical Corrosion Behavior of Biomedical Ti–22Nb and Ti–22Nb–6Zr Alloys in Saline Medium

The electrochemical behavior of a Ti50Ni47Fe3 shape memory alloy

The Electrochemical Behavior And Surface Analysis Of Ti49.6ni45.1cu5cr0.3 Alloy For Orthodontic Usage

Electrochemical Corrosion Behaviour of Ti44Ni47Nb9 Alloy in Simulated Body Fluids

The electrochemical behavior and surface analysis of Ti<sub>49.6</sub>Ni<sub>45.1</sub>Cu<sub>5</sub>Cr<sub>0.3</sub>alloy for orthodontic usage

Comparative Study on the Corrosion Behavior of Ti–Nb and TMA Alloys for Dental Application in Various Artificial Solutions

Surface Characterization and Cell Response of Binary Ti-Ag Alloys with CP Ti As Material Control

Corrosion behavior and electrochemical properties of carbon steel, commercial pure titanium, copper and copper–aluminum–nickel alloy in 3.5% sodium chloride containing sulfide ions

Corrosion Resistance of Dental Alloys in Artificial Saliva

The Electrochemical Behavior and Surface Analysis of Ti50Ni47.2Co2.8 Alloy for Orthodontic Use

Corrosion behaviour of a wrought Ti-6Al-3Nb-2Zr-1Mo alloy in artificial seawater with various fluoride concentrations and pH values

Corrosion Behaviour of Ti–Nb–Sn Shape Memory Alloys in Different Simulated Body Solutions

Corrosion Behavior of Ag-based Alloy in Simulated Body Fluid Solution

Biocorrosion properties of Ti–3Cu alloy in F ion-containing solution and acidic solution and biocompatibility

Corrosion Behavior of Titanium Alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V y Ti Beta-C) with Anodized and Exposed in NaCl and H2SO4 Solutions