Abstract:Anode material seriously influences the characteristics of vacuum arc and further affects the performance of medium-voltage vacuum switches when the interruption current is high. There are many materials used for electrode manufacture, and different materials are selected for different switches. For a pure metal, its performance usually cannot satisfy the actual requirement. To improve switch's performance, an alloy is usually used as an electrode material. In this paper, thermal processes of six kinds of metal anodes (including pure metal and alloy anodes) are simulated and researched. The physical parameters of the pure metals all come from experiment results directly or are fitted by the experimental data. The physical parameters of the CuCr alloys are derived from Cu and Cr parameters. Two kinds of temperature calculation methods are used, which are called melting and solidification model and equivalent specific heat method, respectively. Simulation results show that W and Mo anodes have the higher temperature than Cu, Cr, CuCr25, and CuCr50 anodes. A pure Cr anode has the largest melting width and highest saturated vapor pressure and evaporation energy. A Cu anode has the biggest melting depth. A W anode has the smallest melting width and depth. Axial temperature gradient is related to the thermal conductivity, and the Cr anode has the largest axial temperature gradient. The thermal characteristics of CuCr25 and CuCr50 anodes are located between the pure Cu and Cr anodes. There are two melting points appearing in the results of CuCr alloys, and between the two melting points, the alloy anodes are in solid-liquid mixture state.

Simulative research of effects of parameters of stub hole on anode voltage drop in aluminium electrolysis

Thermo-mechanical Studies of Thimble Geometry and Stub Materials for Voltage Drop Across the Anode-Rod Connection in Aluminum Electrolysis Cell

Technology Research on Decreasing the Aluminum Surface Waves and Reducing the Cathode Voltage Drop in Aluminum Electrolysis Cell

Comparative Experiment on Influence of Ferrum and Cuprum Electrodes on Electroosmotic Effects

Effects of the Application of a Perforated Anode in an Aluminum Electrolysis Cell on the Gas–Liquid Two-Phase Flow and Bubble Distribution Characteristics

Simulation and Analysis of Magnetic Fields and Flow Fields of Metal Pad in 75 Ka Drained Style Aluminum Reduction Cell

Influences of various aluminum accumulation sump designs on thermal stress distribution in drained aluminum reduction cell

Simulation of aluminium electrodeposition on complex geometry: Influence of input parameters and electrodeposition conditions

Analysis of anode current distribution in aluminum electrolysis cell based on equivalent circuit numerical simulation

Improved CFD Modeling of the Whole-Cell Side Ledge Behavior in Aluminum Electrolysis Cell

Influences of Gas Discharging Grooves at Bottom of Prebaked Carbon Anodes on Bath Flow Pattern in Aluminum Reduction Cells

Performance modeling and parameter sensitivity analyses of an aluminum-air battery with dual electrolyte structure

Numerical simulation study of the effect of anodic bubble behavior in aluminum electrolysis cell

Three-Dimensional Microscopic Modeling And Activation Thickness Analysis Of The Anode Of Solid Oxide Fuel Cells

The Effect of Anode Porosity on the Performance of Planar Electrode Supported Solid Oxide Fuel Cell

Numerical Simulation of Thermal Characteristics of Anodes by Pure Metal and Cucr Alloy Material in Vacuum Arc

Simulation study of anode gas and potential distribution of fuel cell based on lattice Boltzmann method

High speed remote laser cutting of electrodes for lithium-ion batteries: Anode

Thermal Stress Analysis of a Planar Anode-Supported Solid Oxide Fuel Cell: Effects of Anode Porosity

Numerical simulation of anode thermal processes of different materials in vacuum arc

Numerical study on the impact of carbon deposition on methane/steam mass transport in solid oxide fuel cell porous anode using lattice Boltzmann modeling