Abstract:High temperature thermal insulation performance plays a crucial role in the application of thermal contact resistance precision measurement to reduce systematic heat loss and ensure 1D axial heat flow. In this paper, a compound insulation system composed of carbon fibrous materials and multilayer insulation (CFMLI) with non-interlayer-contact space was proposed in terms of high temperature sustainability, low thermal conductivity and thermal performance stability. An experimental set-up was designed and fabricated to measure the temperature distribution and the effective thermal conductivity of CFMLI as a function of temperature (800 K-1325 K). The experimental results showed that the temperature gradually decreases from inner to external radius of CFMLI, and a temperature jump of 40 K-80 K appears at the interface between two segments under vacuum conditions. It also reveals that the thermal performance of CFMLI is strongly dependent on the gas pressure and the number of reflective layers, while it is hardly affected by the filling materials when the temperature is above 1050 K. Meanwhile, the effective thermal conductivity of CFMLI varies around 0.2 W/m/K for two levels of pressure (10(-4) Pa and 0.1 MPa), and it decreases by 14.7% when the number of reflective layers increases from 6 to 21 at 1325 K. Additionally, a theoretical model with thermal resistance network was developed for heat transfer analysis of CFMLI. The model could predict the external temperature of CFMLI with high accuracy so that the difference between the theoretical results and experimental data was less than 2.61%.

Performance research of the high quality helium tight composite insulators

Study of the property of EAST composite insulators with finite element analysis

Test research on performance of EAST composite axial insulation breaks

Manufacturing and testing of high-strength low-temperature composite insulator

Research and Analysis on Tensile and Compressive Fatigue Performance of Cryogenic Axial Insulation Breaks

Experimental Study on Paschen Discharge in Helium for High Voltage Cryogenic Insulation Material

High Temperature Baking Test and Study on Axial Insulation Breaks

Influence of Helium State on Electrical Properties of Room Temperature Insulation Breaks for Superconducting Tokamak

Study on electrical properties and field solutions of water related heating of composite insulators on 500kV AC transmission lines

Mechanical Performance of In-service Composite Insulators

Development and Qualification of ITER Current Lead Electrical Insulation

The analysis of new research helium turbine testing of EAST cryogenic system

Insulation structure design and electric field simulation of 500 kV isolation energy supply transformer for HVDC breaker

Preliminary Study on Insulating Design of Electrical Device in Helium for High Temperature Gas-Cooled Reactor

Experiments on Helium Breakdown at High Pressure and Temperature in Uniform Field and Its Simulation Using COMSOL Multiphysics and FD-FCT

An Experimental Study on Insulating Property of Helium in High Temperature Gas Cooled Reactor

Analysis of the Cryogenic System Behavior for Pulsed Heat Load in EAST

Structural Analysis and Fatigue Test of Helium Inlet for EAST PF Coil

Mechanism of Fracture Related Heating for 500-Kv Composite Insulators in Highly Humid Areas

Theoretical and Experimental Study on a Compound Insulation System for High Temperature Applications

Design and test of insulating and sealing structure of high current heater's electrical penetration assembly