Abstract:Steel-braced concentric frames (SBCFs) are a popular form of structure and has been widely employed in seismic regions owing to their high strength and elastic stiffness; however, the effects of key parameters on the collapse behavior of SBCFs are unclear due to insufficient investigations, which should be further explored in column removal scenarios. To this end, numerical models were employed to explore the key parameters affecting the collapse behavior of SBCFs in this study. The numerical models of steel frames with or without braces were validated based on previous experimental results. According to the refined model, the effects of brace members of various types and with different slenderness ratios on the collapse behavior were illustrated. The results showed that an X brace type with smaller slenderness ratio is the most appropriate for enhancing robustness against progressive collapse. Thereafter, full-scale numerical models were established to investigate the effect of the column removal position, and the results showed that the frame relied purely on flexural action in a side column loss. Moreover, the effect of the position of horizontal brace layers on the collapse behavior was investigated in the middle and side column removal scenarios. To gain deeper insight into the load-resisting mechanisms, the specific contributions to the total resistance of different mechanisms in different stories, bare steel frames and braces, and tensile and compressive braces were separated. Finally, a strategy for the robustness enhancement of high-rise steel frames was empirically proposed, and it was suggested that the provision of a brace layer for approximately every 10 stories would be effective for the anti-collapse design of high-rise buildings.

On the efficiency of an eccentric brace on a column and the collapse of the Hartford Coliseum

Lateral buckling of eccentrically braced RHS columns

Buckling Failure of an Unusual Braced Steel Frame Supporting an Electric Dust-Catcher

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

The Stability of Weakly Braced Frames

Column-to-column Interaction in Buckling of Frames

Buckling of Frames Braced by Flexural Bracing

Out of Plane Stability of Greenhouse Side Columns with Eccentrically Lateral Braces

Column Effective Lengths Considering Inter-Story and Inter-Column Interactions in Sway-Permitted Frames

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

A unified approach for multiple lateral bracing of columns

An Interactive Buckling Theory for Built-Up Beam-Columns and Its Application to Centrally Compressed Built-Up Members

Buckling of laterally and torsionally braced beams

Elsatic Out-of-plane Buckling of Hinged I-column with Tapered WEB

Mechanical Behavior of Masonry Columns Strengthened with Basalt Textile Reinforced Concrete under Eccentric Loading: Experimental Investigation and Analytical Modelling

Out-plane Buckling Behavior and Application of Three-Storey Multi-Column Subjected to Axial Load

Numerical evaluation on collapse-resistant performance of steel-braced concentric frames

Effect of warping shape on buckling of circular and rectangular columns under axial compression

Analytical Investigation on Effective Elastic Stiffness of Eccentric Steel Beam–column Joints

Behavior of three-chord concrete-filled steel tube built-up columns subjected to eccentric compression