Out-plane Buckling Behavior and Application of Three-Storey Multi-Column Subjected to Axial Load

郭彦林,王永海

DOI: https://doi.org/10.15951/j.tmgcxb.2011.08.013

2011-01-01

Abstract:The buckling behavior of a compressed column braced with two spring supports, as the equivalent model of three-storey multi-column frame, was investigated systemically in the previous study. It was observed that, with the bracing stiffness increasing, the buckling mode of the column changed from symmetric single wave to antisymmetric double waves before the fully fixed supported reaction was reached. Obviously, two lateral supports in the equivalent model were independent, and the stiffness of the supports was the same even under different buckling mode. However, the two lateral supports of the column were not independent in three-storey multi-column frame subjected to different buckling modes, and the interaction between lateral bracing stiffness of columns and different buckling modes needs to be taken account. In this study , the out-plane lateral bracing stiffness of the columns under different buckling modes in three-storey multi-column frame was obtained via theoretical derivation, so that the column braced with two lateral spring supports could be treated as an equivalent model where the column has different lateral brace stiffness under corresponding buckling mode. The elastic buckling load and effective slenderness of the multi-column were obtained by using the results obtained from the equivalent model. The ultimate load-carrying capacity of three-storey multi-column frame with imperfections was analyzed by using finite element method. The random out-plane imperfection distributions of different columns in the frame were considered in the study above. It was proved that the design approach of the equivalent model could be used to estimate the load-carrying capacity of three-storey multi-column frame.