Abstract:A coupled boundary element method (BEM) and finite difference method (FDM) are applied to solve conjugate heat transfer problem of a three-dimensional air-cooled turbine blade. A loosely coupled strategy is adopted, in which each set of field equations is solved to provide boundary conditions for the other. In the fluid region, computation code (HIT-NS CODE) adopts the FDM to solve the Navier-Stokes equations. In the solid region, the BEM is adopted to resolve the conduction heat transfer equations. An iterated convergence criterion is the continuity of temperature and heat flux at the fluid-solid interface. The solid heat transfer computation code (3D-BEM CODE) is validated by comparing with the results of an analytic solution and the results of commercial code, the results from 3D-BEM CODE have a good agreement with the analytic solution and commercial code results. The BEM uses a weighted residual method to make the Laplace equation convert into a surface integral equation and the surface integral equation is discretized. The BEM avoids the complicated mesh needed in other computation methods and saves the computation time. In addition, the BEM has the characteristic of a combination of an analytic and a discrete solution. So the BEM solutions of heat conduction problems are more accurate. The results of the coupling computation code (HIT-NS-3DBEM CODE) have a good agreement with the experimental results. The adiabatic condition result is different from the results of experiment and code calculation. So the results from conjugate heat transfer analysis are more accurate and they are closer to realistic thermal environment of turbines. Four turbulence models arc applied: K-epsilon model, K-omega model, K-omega (SST-Gamma Theta) model, and B-L model adopted by computation code. Different turbulence models gives different the results of vane wall temperature. Comparing the four turbulence models, the different turbulence models can exactly simulate the flow field, but they can not give exact values for the heat conduction simulation in the boundary layer. The result of K-Omega (SST-Gamma Theta) turbulence model is closer to the experimental data.

Bisector Air Preheater Performance Evaluation Based on Numerical Finite Difference Method

Numerical auxiliary study of charge-air cooler design

Numerical Analysis of the Coupling Between Heat Transfer and Deformation in Rotary Air Preheater

Research on the Heat Balance Calculation of the Tri-Sectional Regenerative Air Preheater

Influence Of Rotational Speed On Thermal Performance Of Tri-Sector Rotary Regenerative Air Preheater

Thermal deformation prediction based on the temperature distribution of the rotor in rotary air-preheater

Self-correction Algorithms to Estimate the Temperature Distribution of Rotary Air Preheaters

Experiments Research on Thermal Performance of Heat Transfer Elements in Rotary Air Preheater

Numerical investigation on the flow and heat transfer in a rotor-stator disc cavity

ICOPE-15-C074 Evaluation of the Heat Transfer Performance of a Tri-Sector Rotary Air Pre-Heater Based on ASME PTC 4.3

Bem/Fdm Conjugate Heat Transfer Analysis of A Two-Dimensional Air-Cooled Turbine Blade Boundary Layer

Numerical Analysis on Heat Transfer and Pressure Drop Performance of an Asymmetric Finned Tube Heat Exchanger

Coupled Bem And Fdm Conjugate Analysis Of A Three-Dimensional Air-Cooled Turbine Vane

Estimation of the Direct Leakage of Rotary Air Preheaters Based on Temperature Distribution Modeling

Experimental and Numerical Investigations on the Local Direct Leakage Process of Rotary Regenerative Air Preheater

Numerical Study on the Aerodynamic Performance of Three-stage Turbine Inner Flow Field with Cooling Air Mixing

Numerical Study of the Air Inlet Angle Influence on the Air–side Performance of Plate-Fin Heat Exchangers

Numerical Study On Heat Transfer Characteristics In Rectangular Ducts With Pin-Fins

Numerical Investigation on Heat Transfer and Pressure Drop Characteristics of Moisture Separator Reheater with Porous Media Method

Numerical simulation and field synergy analysis of heat transfer performance of radial slit fin surface

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations