Abstract:CFD methodology for subcooled flow boiling is significantly affected by the heat flux partitioning model, which plays a crucial role in predicting the mass source term generated by wall boiling of the liquid phase. Although numerous models have been proposed, most research efforts have focused on the spatial dimensions of boiling heat transfer mechanisms, neglecting the temporal aspect. This study presents a heat flux partitioning model for subcooled flow boiling that considers both temporal and spatial dimensions. The model accounts for the contribution of heat flux from the superheated liquid layer during the bubble growth stage, liquid convection during the bubble wait stage within the bubble influence area in the temporal dimension, and heat flux from the overlapping area of bubble influence in the spatial dimension. An approach was developed to determine the bubble influence area by considering the bubble interaction based on the stochastic nature of nucleation sites on the heated wall, verified by the Monte Carlo method. The bubble dynamics parameters were experimentally derived to reduce the uncertainty associated with the boiling sub-models on the calculation. A comparative analysis of boiling curves and wall heat flux partitioning was conducted between the present model and the RPI model under various flow conditions. The results indicate that both models could reasonably predict the boiling curve. However, the RPI model tends to over-predict the proportion of evaporative heat flux, which is considered a weakness. Based on physical principles, the present model accurately captures the fundamental trend of wall heat flux partitioning. This research enhances the understanding of subcooled flow boiling and increases confidence in multiphase CFD methodology predictions.

A fluid–dynamic model for flow pattern on a distillation tray

Flow pattern identification for three-phase distillation with a nonequilibrium modeling

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Thin liquid film flow and heat transfer under spray impingement

Theoretical modeling of the boiling annular-mist flow in vertical channels

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

CFD study on flow characteristics of sieve tray columns with circular downcomers

Measurement and theoretical analysis of transient liquid film during micro-channel flow boiling

Internal Flow in Evaporating Droplet on Heated Solid Surface

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SATURATED FLOW BOILING IN VERTICAL CHANNELS

A Mechanistic Model for Slightly Subcooled Flow Boiling in Vertical Tubes

A Unifying Bubble-Layer-Based Theoretical Model for Flow Boiling and Application to a Rod Bundle

Boiling and evaporation model for liquid-gas flows: A sharp and conservative method based on the geometrical VOF approach

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

Liquid Film Model for the Flow in a Twin-Fluid Atomization Nozzle

Thermal convection in the van der Waals fluid

Evaporative annular flow in micro/minichannels: A simple heat transfer model

The fluid dynamic characteristics of the 95-type tray

An investigation of a gas-liquid swirling flow with shear-thinning power-law liquids

Model for Distribution of Heated Falling Liquid Film on Vertical Solid Planar Surface