Abstract:A mixture of several typical model compounds was chosen as the bio-oil model. Hydrogen production via catalytic steam reforming of model bio-oil in a two-stage reaction system was studied in this article. Quartz sand was used in the first-stage fluidized bed reactor for primary steam reforming, and Ni/modified dolomite was chosen as the catalyst in the second-stage fixed bed reactor for deep steam reforming. The main influential parameters, such as temperature, steam to carbon ratio, and weight hourly space velocity, were tested in this work. The optimum conditions on hydrogen production were obtained at 800 degrees C; steam and carbon mole ratio, 12; and weight hourly space velocity, 1 h(-1). In addition, there was a comparison between a two-stage reaction system and one-stage fixed bed reactor on the optimum condition. It was concluded that H-2 yield decreased 5.6% in the two-stage reaction system and 9.9% in the one-stage fixed bed reactor after 3 h reaction time; the maximum carbon deposition ratio was 1 and 0.44%, gaseous carbon selectivity dropped from 93.6 and 90.1% to 83.4 and 78.4%. The fresh catalyst as well as used catalyst were analyzed by scanning electron microscopy, which showed that the carbon deposition in the two-stage reaction system is less than that of the one-stage fixed bed reactor.

Hydrogen Production from Steam Reforming of Bio-Oil with C12A7-K2O Catalyst

Production of hydrogen from catalytic steam reforming of bio-oil using C12A7-O−-based catalysts

Hydrogen Production by Catalytic Steam Reforming of Bio-Oil, Naphtha and Ch4 over C12a7-Mg Catalyst

Hydrogen Production Via Catalytic Steam Reforming of Bio-Oil Model Compound in A Two-Stage Reaction System

Comparative study on the catalytic steam reforming of biomass pyrolysis oil and its derivatives for hydrogen production

Mechanism of hydrogen production by the catalytic steam reforming of bio-oil

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Biomass Fast Pyrolysis Oil

Hydrogen Production by Catalytic Steam Reforming of Heavy Components in Bio-Oil in Fluidized Bed Reactor

Preparation of Hydrogen Through Catalytic Steam Reforming of Bio-oil

Catalytic Conversion Of Bio-Oil To Hydrogen On The C12a7-Mgo Catalyst

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

Steam Reforming of Bio‐Oil for Hydrogen Production: Effect of Ni‐Co Bimetallic Catalysts

Enhanced Hydrogen Production from Steam Reforming of Vegetable Oil over Bimodal ZrO2-SiO2 Supported Ni Catalyst

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Bio-Oil

STEAM REFORMING BIO-OIL TO PRODUCE HYDROGEN IN A FLUIDIZED BED REACTOR

Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

Hydrogen production from steam reforming of bio-oil model compound and byproducts elimination

Steam Reforming of Model Compounds and Fast Pyrolysis Bio-Oil on Supported Nickle Metal Catalysts for Hydrogen Production

Steam Reforming of Bio-Oil from Rice Husks Fast Pyrolysis for Hydrogen Production.

Hydrogen Production Via Catalytic Steam Reforming of Fast Pyrolysis Bio-oil in a Fluidized-Bed Reactor

Research of the combined reforming of bio‐oil model compound for hydrogen production